A. 如果调节止动不正确,而试结果将不准确。
B. 如果调节止动未修正,测试结果将不准确。
C. 如果止动点调整不正确,而试结果将不准确。
A. 把这些部分中的每一个故障按概率的顺序列出。
B. 把这些部分按概率的顺序列在每个故障下面。
C. 把这些故障列在每个部分下面为了增加概率。
A. 各类出版物宜釆用水平页,不可釆用垂直页。
B. 各类出版物可釆用垂直页,也可采用水平页。
C. 各类出版物宜釆用垂直页,不宜釆用水平页。
A. 制造商应将制造商发布的类型服务信息以及为获取此类信息而联系的办公室或部门的描述包括在内,以便飞机可以按照发布的最新信息进行维护。
B. 制造商应包括其发布的服务信息的类型说明,以及能提供此类信息的办公室或部门,从而拔照最终 发布的信息维护飞机。
C. 制造商应将其发布的服务信息的类型包括在内以及能提供此类信息的办公室或部门,从而按照最终发布的信息维护飞机。
A. ”'维修施工”包括维修、拆卸/安装、道应 Z 测试、检验/检查、清洁/喷漆和故障排除部分准的修理。
B. ”维修施工”包括勤务、拆卸/安装、调节/测试、检验/检查、清洁/喷漆及批准修理,且遵循故障 排除部分。
C. ”维修施工”包括维修、拆卸/重装、调节/测试、检验/检查、清洁/喷漆或故障排除部分准的修理。
A. Data and parameters,collected by three computers from the systems,are transferred to the display unit through the data link.
B. Data and parameters on the data link are collected and gathered together by three computers from the systems to the display unit.
C. Data and parameters are collected from the systems and gathered together on the data link to the display unit by three computers.
A. 如果不正确跟进操作程序、检查、修理或维护程序,可能导致人员受伤。
B. 如果没有紧跟操作程序、检查、修理或维护程序,可能导致人员伤亡。
C. 如果不正确遵循操作程序、检查、修理或维护程序,可能导致人员伤亡。
A. 在这些情况下,俯仰的机械配平和电配平系统都将不工作。
B. 当出现以下这些情况,俯仰的机械配平和电配平系统都将继续工作。
C. 在这些情况下,电配平系统都将继续工作,俯仰的机械配平不再工作。
A. The form of the cruise performance presentation is at the option of the airplane manufacturer but should not be independent of devices such as a power computer.
B. The format of the cruise performance presentation is decided by the airplane manufacturer itself but should not depend on devices such as a power computer.
C. The layout of the cruise performance presentation is at the discretion of the airplane manufacturer;however,devices such as a power computer should not be relied on.
A. Give long term protection to areas of bare metal since bare metal surfaces are usually unsatisfactory for an electrical bond.If there is corrosion on the surfaces,it will cause severe problems.
B. Give temper protection to areas of bare metal since bare metal surfaces are always satisfactory.for an electrical bond.If there is corrosion on the surfaces,it will cause severe problems.
C. Protect the bare metal areas temporarily since this kind of surfaces are usually adequate for electrical bond.If corrosion happens on the surfaces,it will bring serious problems.