A、 如果厚度超过 0.1 mm,则重新安装零件。
B、 如果重叠超过 0.1 mm,则重新组装零件。
C、 如果间距超过 0.1 mm,则重新调整零件。
答案:B
A、 如果厚度超过 0.1 mm,则重新安装零件。
B、 如果重叠超过 0.1 mm,则重新组装零件。
C、 如果间距超过 0.1 mm,则重新调整零件。
答案:B
A. 将螺纹杆放入接头中
B. 将杆的一端缠上线放入接头中
C. 将杆的螺纹端放入接头中
A. 涂料足够柔软,用塑料铲子将其去除。
B. 涂料足够柔软,用塑料楔子将其去除。
C. 涂料足够柔软,用胶铲子将其去除。
A. 连接可以连接的导线。
B. 把断开的导线重新断开。
C. 连接断开的导线。
A. Move the sensor downstream and calculate the temperature again.
B. Move the probe downstream and monitor the temperature again.
C. Move the part downstream and measure the temperature again.
A. The system is pneumatically operated and mechanically controlled.
B. Hydraulic power drives the system, while electricity is connected.
C. The system is hydraulically operated and electrically controlled.
A. 复合板材使搭接处更坚固。
B. 加强板使搭接接头更坚固。
C. 经过再次强化的板材使搭接凸缘承力更强。
A. 纠正措施在适航指南中给出,如检查,维修或改装,在适航指南中详细说明,或在另外一个文件中给出,如制造厂家服务通告,该服务通告在适航指南中作为参考。
B. 适航指令描述的纠正措施,比如检查、修理或改装的具体要求,可由适航指令详细给出,或包含在另外一个文件中,如制造厂家服务通告,该服务通告在适航指令中列为参考文件。
C. 适航指令或另一个文件,如制造厂家服务通告可详细给出检查、修理或大修等纠正措施,该服务通告刊登在适航指令中作为参考。
A. If the microswitch becomes unserviceable, proceed with the actuator activation procedure to damage the valve.
B. When the microswitch is functional, ensure the deactivation procedure of the actuator is performed to avoid any harm to the valve.
C. If the microswitch malfunctions, execute the actuator deactivation procedure to protect the valve from harm.
A. When the cumulative revised pages (including back-up pages) exceeds 60% of the total pages of the manual, a reissue should be prepared.
B. If the updated pages, including back-up pages, were less than 60% of the total page of the manual, a new manual should be copied.
C. Up to 60% of total pages (including back-up pages) were accumulated by mistake, the manual should be rewritten.
A. 只有制造商和运营商做好各自工作,才能使其余整个飞机机队全部适航。
B. 只有制造商和运营商共同努力,才能保持整个飞机机队持续适航。
C. 只要制造商和运营商共同完成工作,就能保留完整飞机机队的持续适航性。