A、 当按照指令给活门施加大于设定值的力,活门会反向操作。
B、 当在相反方向上施加压力大于设定值时,它就会工作。
C、 当施加压力操作活门时,用力超过设定值活门反向活动。
答案:B
A、 当按照指令给活门施加大于设定值的力,活门会反向操作。
B、 当在相反方向上施加压力大于设定值时,它就会工作。
C、 当施加压力操作活门时,用力超过设定值活门反向活动。
答案:B
A. 描述飞机螺旋桨时,可包括可变桨距螺旋桨的剖面图。
B. 描述飞机螺旋桨时,可包括变桨距螺旋桨的水平图。
C. 描述飞机螺旋桨时,可包括固定桨距螺旋桨的剖面图。
A. 如果超过50%的污染物造成孔堵塞,则要清理显示组件背面的孔。
B. 如果污染物造成孔堵塞超过 50%,就要清洁显示组件后面的孔。
C. 如果50%的孔被污染物堵塞,则要清理显示组件底部的孔。
A. 标准化将通过对根据本规范制定的持续适航程序中所包含的检查要求的统一解释来提高安全性。
B. 标准化通过统一检查包含在持续适航程序中准备的相应规范来增强安全性。
C. 通过对符合本规范的持续适航程序中的检查要求进行一致性验证,标准化将提高安全性。
A. If you don't do the OVHT/FIRE test, there is no indication of single loop operation in the flight compartment.
B. If you don't do the OVHT/FIRE test, the flight compartment has no single loop operation.
C. No indication of single loop operation in the flight compartment as you do the OVHT/FIRE test.
A. Immediately clean the area if one of the two compartments is affected by lead contamination.
B. If there is mercury pollution in the compartments, clean one of the two areas immediately.
C. If there is mercury contamination in one of the two compartments, clean the area immediately.
A. “涡轮进口温度表”是一种温度显示系统,可显示发动机涡轮部分的气体温度。
B. “涡轮进口温度表”是一种温度感知系统,可显示发动机进气口的气体温度。
C. “涡轮进口温度表”是一种测量发动机涡轮部分燃气温度的系统。
A. Make sure that you can see the oil level through the sight gauge.
B. Make sure that the oil quantity is shown on the oil level indicator.
C. You can read the oil level on the oil level gauge.
A. 记住,STE的重要作用是让读者能够立即理解他们所读到的每一句话。
B. 记住,STE的初级目标是让读者能够立即反应他们所读到的每一句话。
C. 记住,STE的主要目的是让读者能够立即理解他们所读到的每一句话。
A. 冷却系统可以在客舱控制以提供冷却空气。
B. 冷却系统提供冷却空气控制客舱温度。
C. 冷却系统及其控制为客舱提供冷却空气。
A. Rivets can be used to separate the two stringers.
B. You can use two rivets to attach the stringers together.
C. Use rivets to connect the two stringers together.