A、 此说明帮助您找到相关的适用STE规则和不同特定主题。
B、 此索引帮助您找到与不同特定主题相关的适用STE规则。
C、 此指数可以帮助您找到不同于特定主题相关的适用STE规则。
答案:B
A、 此说明帮助您找到相关的适用STE规则和不同特定主题。
B、 此索引帮助您找到与不同特定主题相关的适用STE规则。
C、 此指数可以帮助您找到不同于特定主题相关的适用STE规则。
答案:B
A. 逐步打开充电装置上的堵盖。
B. 逐渐打开充电装置上的旋塞。
C. 逐步打开充电单元上的开关。
A. 机务使用方向盘操纵飞机在滑行期间的方向。
B. 机组在推出期间通过转弯手轮控制飞机方向。
C. 机组在用方向盘后退期间控制飞机方向。
A. After pressing the LSK next to EXIT, the BITE will take you out of BITE test and the airplane will return to its normal condition.
B. The BITE will continue the BITE test and the airplane will go back to its usual condition when you push the LSK next to EXIT.
C. The BITE will proceed the BITE test and the airplane will go back to its normal configuration after releasing the LSK that is adjacent to EXIT.
A. Aluminum wire should not be attached to engine mounted accessories or used in areas having corrosive fumes, severe vibration, mechanical stresses, or where there is a need for frequent disconnection.
B. Aluminum line should not be connected to attachments which are mounted on the engine and also not be applied in domains where corrosive gases, serious oscillation, mechanical forces exist or where it is necessary to disconnect frequently.
C. Aluminum cable should not be linked to accessories installed on the engine. It should also not be used in the event of corrosive fumes, serious vibration, mechanic loads or the place where frequent disconnections are required.
A. If the brackets are not damaged, continue the procedure.
B. In the absence of damage to the brackets, recall the process.
C. When bracket damage occurs, recall the procedure.
A. Handbooks shall be ready to revise in accordance with the specification.
B. In accordance with the specification, manuals should be easy to revise.
C. Handbooks have been already revised, according to the specification.
A. 如果填充剂粘在工具上,用冷水湿润工具。
B. 如果使用工具时需用封圈辅助,用冷水先清洗工具。
C. 如果需要使用填充剂粘接工具,用冷水浸泡工具。
A. By using the basic provisions of FAR 21.50, revisions become consistent with the format of the specification.
B. FAR 21.50 provisions are the basic to the revisions which are consistent with the format of the specification.
C. To make revisions consistent with the format of the specification, the provisions of FAR 21.50 should be adopted as a basis.
A. Do not apply too much composite on the blanket.
B. Do not apply too much adhesive on the gasket.
C. Do not apply too much compound on the gasket.
A. 从地板护盖上去除剩余的密封胶。
B. 保留地板护盖上残存的溶剂。
C. 去除地板护盖上剩余的溶剂。