A、 确保自锁螺母靠近弹簧。
B、 确保锁定螺母接触弹簧。
C、 确保弹簧顶紧锁螺母。
答案:B
A、 确保自锁螺母靠近弹簧。
B、 确保锁定螺母接触弹簧。
C、 确保弹簧顶紧锁螺母。
答案:B
A. 每本手册都应有导言,内容除了包括厂家技术出版物清、或清单的参考位置以外,还需简要说明手册的组织、内容和使用方法。
B. 每本手册都应包括介绍,简要说明其组织机构、手册内容和手册使用方法。额外的清单或参考清单位置要包括在制造商技术出版物中发布。
C. 每本手册都应有前言,其中要说明机构、内容,以及除了制造商技术出版物清单、清单位置的引用手册使用方法做简要说明。
A. Use a filter to remove unwanted material from the oil.
B. Use a valve to remove unwanted material from the gas.
C. Use a filter to remove unwanted material from the fluid.
A. 与本规范的符合性相关的重要意见应予以公布。
B. 对于和本规范相抵触的重大意见应予以公布。
C. 应发布符合本规范的重要议题。
A. After wash aircraft, all 3 landing gears were found un-lubricated.
B. After aircraft wash, all 3 landing gears were found un-lubricated.
C. After aircraft clean, all 3 landing gears was found un-lubricated.
A. Replace the No. 1 and No. 2 computers. Then do the test again.
B. Interchange the No. 1 and No. 2 computers. Then do the test again.
C. Repair the No. 1 and No. 2 computers. Then do the test again.
A. 系留操作中的警戒之一是:所有的滑行和拖动操作的最后几英尺必须是一条直线。这是为了防止对轮胎和主起落架施加力量。
B. 系留操作中的警戒之一是:所有的滑行和拖动操作的最后几英尺必须用一条直线。这是为了防止对轮胎和主起落架施加力量。
C. 系留操作中的警戒之一是:所有的滑行和拖动操作的最后几英尺必须走直线。这是为了防止对机轮和主起落架施加力量。
A. 确保发动机排气区周围有安全围挡。
B. 确保发动机进气区前面有安全界线。
C. 确保工程排气区前面有安全阻碍。
A. 确保夹钳的位置与您在拆卸过程中记录的位置一致。
B. 确保夹钳的位置与您在拆卸过程中的位置齐平。
C. 确保夹钳的方向与您在拆卸过程中的方向一致。
A. 飞行环境数据和皮托静压系统包括皮托管、静电管、气温、爬升速度、空速、高速警告、高度、高度报告、高度计校正系统等。
B. 飞行环境数据和皮托静压系统包括皮托管、静压管、气温、爬升率、空速表、高速警告、高度、高度报告、高度表校正系统等。
C. 飞行环境数据和皮托静压系统包括皮托管、静压管、气温、爬升速度、气流速度、高速警告、海拔、海拔报告、海拔计修改系统等。
A. Manufacturer determines specific range properly to describe sophisticated and professional information. The information can be put in Maintenance Maunal or other documents.
B. Detailed information on more intricate and specific subjects can be written in two ways: Maintenance Manual or individual documents. The two ways are dependent on manufacturer's option properly.
C. It is up to the manufacturer to decide where and to what extent to include detailed information about more sophisticated and professional topics, either in the common Maintenance Manual or in another new documents.