This Section of the Pilot＇s Operating Handbook shall contain all performance information required by the Federal Aviation Regulations (or other applicable regulations) and this Specification.

A. The complexity and stringency of this test or check are different from the operation conditions of the unit.

B. The test or check will change in complexity and stringency no matter what the conditions under which the unit operates.

C. Such tests or checks will vary in complexity and stringency according to the conditions under which the unit functions.

A. 接近和位置的说明会在这里给出不少信息。

B. 除非很困难，否则接近和位置的说明会在此给出。

C. 除非很明显，否则接近和位置的说明会在此给出。

A. 包含大写字母加名词或数字加名词的术语，通常用于描述某物的形状或结构。

B. 包含大写字母加名词或数字加名词的条款，通常用于描述某事的形式或特性。

C. 项目首字母加名词或者数字加名词的，通常要描述某物的外形和构造。

A. 小心确认管路尽可能靠近探头支架的面板而不要碰到探头。

B. 小心确认接头尽可能靠近面板的天线支架而不要碰到天线。

C. 小心确认探头尽可能靠近面板的天线支架而不要碰到天线。

A. 为了简化阅读和相互援引，插图、图形和表格应尽可能以纵向排列布局呈现。

B. 为方便阅读和相互参照，如可行，插图、图形和表格应垂直排列布局。

C. 为了精简阅读和交叉索引，插图、图标和表格如可行，应纵向排列布局。

A. Find the related EICAS status message which present with the maintenance information .

B. Find the correlated maintenance message that shows with the EICAS status message.

C. Find the applicable maintenance message displaying with the EICAS status message.

A. If the two indications do not agree, do the test again.

B. If there is a conflict between the two indications, repeat the test.

C. If the two indicators show any conflict, repeat the test.

A. This Specification includes miscellaneous FAA regulations.

B. This Specification is involved in numerical FAA regulations.

C. This Specification refers to various FAA regulations.

A. These tests need no special equipment or facilities except those installed on the aircraft, and are like the tests performed by flight crews.

B. These tests need some special equipment or facilities that are not installed on the aircraft. And these tests are the same to the tests performed by flight crews.

C. These tests need special equipment or facilities that are installed on the aircraft, and are identical with the tests performed by flight crews.

A. Accumulate the thickness of the shim as follows: t=x-y.

B. Calculate the thickness of the shim as follows: t=x-y.

C. Calculate the width of the shim as follows: t=x-y.