A、 Landing gear position has no effect on stall speeds.
B、 The position of the landing gear doesn＇t influence the surging speed.
C、 The idle speed is not effected by the landing gear position.
答案：A
A、 Landing gear position has no effect on stall speeds.
B、 The position of the landing gear doesn＇t influence the surging speed.
C、 The idle speed is not effected by the landing gear position.
答案：A
A. The drain float valves in the vent tubes and the vent channels dilute the fuel in the vent system to drain out of the tank when the fuel face is lower than the valve.
B. The drain float valves in the vent tubes and the vent channels permit fuel in the vent system to drain into the tank when the fuel level is lower than the valve.
C. The drain float valves in the vent tubes and from the vent channels allow the fuel in the vent system to drain into the tank when the fuel quantity is lower than the valve.
A. Legal meaning whatsoever and implications couldn＇t be enclosed to the rules and terms in this document.
B. No legal significance or meanings should be fixed to the regulations and terms in this document.
C. The rules and terms in this document have no legal meaning or imply something.
A. The operation rods are connected to the hydraulic feedback.
B. The operation barrels are connected to the hydraulic return.
C. The actuators are connected to the hydraulic return.
A. 分步执行这两个步骤。
B. 依次执行这两个程序。
C. 同时做这两个步骤。
A. 使用符号代表电磁活门，显示该活门是否是弹簧加载到开位或关位。
B. 应针对电磁活门标明注意事项，说明该活门应该弹簧加载到开位还是关位。
C. 电磁活门应标有符号，表明该活门是弹簧加载到开位还是关位。
A. Based on different airplane design, the Emergency Procedures and other pertinent information necessary for safe operation should only be provided for some airplane.
B. Based on the particular airplane design, operating or handling distinguishing feature, Emergency Procedures and related information must be provided.
C. The Emergency Procedures and other special information necessary for safe operation shall be provided for emergencies that is common to all airplane design, operating or handling characteristics.
A. Apply fuel to the steel surfaces.
B. Apply oil to the alloy surfaces.
C. Apply oil to the steel surfaces.
A. The condenser decreases the temperature of the air in the air conditioning pack to below the dew point, changing water vapor into liquid.
B. The cooler lowers the air temperature to the boiling point in the air conditioning module, which can transfer the steam into water.
C. The evaporator turns steam into liquid by reducing the temperature of the air in the air conditioning pack to the evaporating point.
A. Make up for all gaps which are larger than 0.05 mm.
B. Repair all cracks that are wider than 0.05 mm.
C. Overhaul all fissures which are greater than 0.05mm.
A. 用直尺和塞尺测量划痕的深度。
B. 用直边的卡尺测量凹坑的深度。
C. 用直尺和塞尺测量凹坑的深度。
