A、 Ensure that the porosity is less than the specified error.
B、 Ensure that the depth of the hole conforms to the specified value.
C、 Make sure that the diameter of the hole is less than the specified value.
答案：C
A、 Ensure that the porosity is less than the specified error.
B、 Ensure that the depth of the hole conforms to the specified value.
C、 Make sure that the diameter of the hole is less than the specified value.
答案：C
A. 排气系统指将发动机废气导出机外的装置和组件。
B. 噪声抑制装置是指系统中降低排气噪声的部分。
C. 排气系统指将发动机废气导出机外的装置和组件。
A. NOTE: The manufacturer may have the option of including wiring schematic in Chapter 24, Chapter 91, or establish a separate Wiring Diagram Manual.
B. NOTE: The manufacturer may have the option of including wiring schematic in Chapter 24, Chapter 91, or establish a separate Wiring Schematic Manual.
C. NOTE: The manufacturer may have the option of including wiring diagrams in Chapter 24, Chapter 91, or establish a separate Wiring Diagram Manual.
A. 他拆下入口盖板来看是否有腐蚀的管路。
B. 他移开进入面板检查生锈的管道。
C. 他拆掉了近进盖板看到了腐蚀了的管路。
A. The supplements of CAP are the airplane＇s maintenance manual (or Instructions for Continuing Airworthiness). The CAP is the primary document containing the aircraft＇s continuous airworthiness procedures.
B. The airplane＇s maintenance manual (or Instructions for Continuing Airworthiness) serves as the main document that contains the procedures to ensure the continuing airworthiness of the airplane. CAP is a supplementation to the manual.
C. CAP supplements the airplane＇s maintenance manual (or Instructions for Continuing Airworthiness). The supplements are the major document and involve in the procedures for the continuing airworthiness of the airplane.
A. 其他信息可能会显示在封面上。
B. 其他信息可能会在盖板上留下。
C. 其他信息可能会显示在目录上。
A. 拆下并且标识预处理的包装。
B. 拆下并且丢弃预处理的组件。
C. 拆下并且丢弃预成型的封圈。
A. 姿态指引仪部分包括陀螺地平仪、方向陀螺仪、磁罗盘、磁航向系统、转弯悬停仪、放大器、伺服系统和飞行指引仪等。
B. 姿态指引仪部分包括陀螺地平仪、回转方向仪、磁罗盘、磁头系统、转弯悬停仪、放大器、伺服系统和飞行指引仪等。
C. 姿态指引仪部分包括陀螺地平仪、定向陀螺仪、磁罗盘、磁航向系统、转弯倾斜仪、放大器、伺服系统和飞行指引仪等。
A. 空中模式设定30秒后飞行开始。
B. 飞行开始30秒后可以进入空中模式。
C. 当探测到空中模式超过30秒, 飞行开始。
A. 关键字、开关及杠杆在“条件栏”大写。
B. 大写关键词的开关和杠杆位置。
C. “条件栏”中的关键字或开关及手柄位置使用大写。
A. Adjust the frequency to the value giving in table 1.
B. Adjust the frequency per the value given in table 1.
C. Adjust the frequency to the value given in table 1.
