A、 Augment the pressure slowly (no less than one turn each minute).
B、 Increase the pressure slowly (not more than one turn each minute).
C、 Release the pressure slowly (not more than one turn each minute).
答案:B
A、 Augment the pressure slowly (no less than one turn each minute).
B、 Increase the pressure slowly (not more than one turn each minute).
C、 Release the pressure slowly (not more than one turn each minute).
答案:B
A. 确保气流不低于10升/分钟。
B. 确保空气流量为10升/分钟。
C. 确保气流不超过10升/分钟。
A. Other format is not permitted.
B. It's not permissible to use this form.
C. Either format is allowed.
A. 描述飞机仪表面板时,应命名并说明面板上的仪表、灯光、电门和控件的使用。
B. 描述飞机仪表面板时,应明确面板上各个仪表、灯、开关和控制按钮的名称,并描述各自操作方法。
C. 描述飞机仪表面板时,应命名并说明台板上的仪器、灯光、电门和控件的使用。
A. The forward movement of the control lever must be slow and continuous.
B. The control lever must be kept moving forward slowly and abruptly.
C. You must continuously slow down the forward movement of the control lever .
A. The maintenance personnel shall read the Service Notice and comply with the requirements ahead of maintenance.
B. Service Bulletin should be read and related requirements should be known prior to maintenance by the maintenance personnel.
C. Read Service Bulletin and understand the content of requirements during maintenance.
A. 《飞行员操作手册》的本节应包含FAR(或其他适用法规)和本规范要求的所有绩效信息。
B. 《飞行员操作手册》的此节内容应包含FAR(或其他适用规章)和本规范要求的所有性能信息。
C. 《飞行员操作手册》的这一节内容应包含FAR(或其他适用条例)和本规范要求的所有参数信息。
A. Take the oxygen mask in a hurry to start the flow of oxygen.
B. Pull the oxygen mask with a sudden movement to start the flow of oxygen.
C. Pull the oxygen mask in a must to start the flow of oxygen.
A. 将这些部分按概率顺序列在每个故障下面。
B. 根据可能的指令在每个问题中列出这些部分。
C. 将这些部分在潜在订单的问题中列举出来。
A. That section of the systems which controls the position and rotation of the trailing edge flaps.
B. That portion of the systems which controls the position and movement of the trailing edge flaps.
C. That part of the systems which controls the position and rotation of the flaps.
A. When cleaning corrosion with a cleaning fluid, avoid damaging adjacent areas.
B. Avoid damaging the area around when we clean the corrosion with cleaner.
C. Use solution to clean the corroded area and prevent to damage the surroundings.