A、 The total quantity of fuel in the center tank is 5000 lb.
B、 The Total Fuel Quantity of the main tank is 5000 pounds.
C、 The total fuel consumption from the center tank is 5000 pounds.
答案：A
A、 The total quantity of fuel in the center tank is 5000 lb.
B、 The Total Fuel Quantity of the main tank is 5000 pounds.
C、 The total fuel consumption from the center tank is 5000 pounds.
答案：A
A. Manufacturers＇ recommended time limits, maintenance checks and inspections (both planned and unplanned) are arranged in Chapter 5.
B. Manufacturers＇ recommended time limits, maintenance checks and tests (both scheduled and unscheduled) are arranged in Chapter 5.
C. Manufacturers＇ recommended time limits, maintenance checks and inspections (both scheduled and unscheduled) are arranged in Chapter 5.
A. By way of the control unit, enter the opening in the side of the tank.
B. Get access to the control unit through the opening in the side of the tank.
C. Get access to the control unit by opening one side of the tank.
A. When the temperature of vent rises to 27℃, the exhaust pipe opens.
B. When the ventilation temperature is above 27℃, the drain mast opens.
C. When the temperature of the ventilation air increases to 27 °c, the discharge valve opens.
A. 格式和布局应由CAP编写者决定，且应与CAP编写者现有文件的格式和布局相似。
B. CAP编写者决定格式和排版，并认可与编写者现有文件格式类似的格式和排版。
C. 确认与CAP编写者的现有文件相似后，由CAP编写者批准确定表格和设计。
A. “力臂”是物体重心到基准面的水平距离。
B. “力臂”是物体重心到参考面的垂直距离。
C. “力矩”是物体中心到参考基准面的距离。
A. 找到振动区域。
B. 找到腐蚀区域。
C. 找到受损区域。
A. 在测试结束后，拆下热敏装置。
B. 完成测试后，拆下传感器。
C. 安装传感器后方可进行测试。
A. instruments are delicate precision devices and calibrited used to measuring electrical .All instruments should be periodically checked for accuracy by the manufacturer or by some shop approved by manufacturer.
B. instruments are delicate precision devices and calibrited used to measuring electrical .All instruments should be continuously checked for correct by the manufacturer or by some shop autherized by manufacturer.
C. Electrical measuring instruments are delicate precision devices and calibrited.All instruments should be periodically checked for accuracy by the manufacturer or by some shop approved by manufacturer.
A. 本段描述了不同飞行阶段重量和力矩的计算程序，以及确保重心处于经批准范围内的程序。
B. 本段描述了为计划飞行的各个阶段计算重量和力矩的程序，以此确保重心处于经批准的范围内。
C. 本段描述了为计划飞行的各个阶段计算重量和配平的程序以及确保重力的中心点在批准范围内的程序。
A. Functional test is the determination that a system or component performs the required procedures in all respects in accordance with the minimum acceptable system or component design specifications.
B. Functional test is that procedure required to ascertain that a system or unit is functioning in all aspects in accordance with minimum acceptable system or unit design specifications.
C. Functional testing is the procedure requested to determine that a system or component operates in all respects according to the minimum unsanctioned system or component design specification.
