A、 Make sure that the warranty life of the material is not expanded.
B、 Make sure that the retirement period of the material is not exceeded.
C、 Make sure that the shelf life of the material is not expired.
答案：C
A、 Make sure that the warranty life of the material is not expanded.
B、 Make sure that the retirement period of the material is not exceeded.
C、 Make sure that the shelf life of the material is not expired.
答案：C
A. Move the IDG forward and outboard until it is away from the accessory gearbox, QAD ring and power plant.
B. Move the IDG towards the forward position until the input shaft is away from the accessary gearbox and QAD ring, then move the IDG towards outboard and free of the power plant.
C. After moving the IDG towards the forward position, then it is free of the accessary gearbox, QAD and the power plant.
A. 数据应显示外界温度、高度和风与起飞距离的关系。应包括地面滑跑距离和飞机达到高于地面50英尺的总起飞距离。达到这些距离所需的速度需应以指示空速给出。
B. 数据应显示为距离与外界大气温度、高度和风的关系。应包括地面滑跑和超过50英尺障碍物的总距离。达到这些距离所需的速度应在指示空速中规定。
C. 数据应以起飞距离与外界空气温度、高度和风力的关系来表示。地面横滚和50英尺障碍物的总距离都应包括在内。达到这些距离所需的速度应以指示空速进行计算。
A. Accelerate Stop Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, to bring the airplane to a stop.
B. Accelerated stop distance refers to the distance required to promote an aircraft to a stipulated speed, assuming that engine failed occurs at that speed and the aircraft stops flying.
C. Accelerating stop distance is defined as the distance requiring to speed up an aircraft to a specific speed, assuming that engine failed at that speed and the aircraft stops flying.
A. If the tire temperature is unusually high, open the valve.
B. If the tyre pressure is insufficiently high, open the valve.
C. If the tire pressure is unusually high, open the valve.
A. Troubleshooting can only be performed after the cause of the malfunction has been found out.
B. You should perform troubleshooting according to the procedure and find out the technical failure.
C. According to the procedure, perform the troubleshooting to solve the cause of the malfunction.
A. 当主轮舱有火的时候，轮舱热量缺陷控制器会给两个红色警灯和警铃一个信号。
B. 轮舱里的过热故障控制器会提供一个信号给两个红色警灯和警铃，当主轮舱有火的时候。
C. 当主轮舱有火的时候，轮舱里的过热探测控制器会提供一个信号给两个红色火警灯和警铃。
A. 该符号指该章节的全部或大部分规则。
B. 该索引指本部分的全部大部分规则。
C. 该内容包括那个部门的全部或大部分规则。
A. 描述飞机起落架时，应描述前轮制动。
B. 描述飞机起落架时，应描述机轮刹车。
C. 描述飞机起落架时，应描述机轮停车。
A. Utilize an oil-free solution.
B. Use a solution with oil.
C. The oil is not used that contains a solution.
A. RESET测试电门用于减少故障历史。当VERFIY(通过)和绿色GO灯亮时, 按下RESET(复位)电门。
B. RESET测试电门用于转移故障记录。当VERFIY(验证)和绿色GO灯打开时, 按下RESET(复位)电门。
C. RESET测试电门用于消除故障记录。当VERFIY(确认)和绿色GO灯亮时, 按下RESET(复位)电门。
