A、 System test is normally used at minor maintenance time.
B、 System test is usually done during maintenance and repairs.
C、 System test is normally used at major maintenance periods.
答案：C
A、 System test is normally used at minor maintenance time.
B、 System test is usually done during maintenance and repairs.
C、 System test is normally used at major maintenance periods.
答案：C
A. It sets forth supplier recommended and FAA required retirement (removal from service) times for parts or assemblies (using hours, intervals or other appropriate determinant) and life limited parts or assemblies.
B. It sets forth manufacturer recommended retirement times for parts or assemblies (using hours, cycles or another appropriate determinant) and FAA required retirement (removal from service) times for life limited parts or assemblies.
C. It sets forth retirement times for parts or assemblies (using hours, loops or another appropriate determinant) established by the manufacturer and retirement (removal from service) times for life limited parts or assemblies required by FAA.
A. The specification gives the symbols for relays, diodes, and other parts of the system.
B. The specification gives the requirement for markings on relay, triode and other parts of the system.
C. The specification excludes symbols for relays, diodes, and other system parts.
A. To simplify the overall master wiring diagram to make it easy to understand, complex systems should be described in terms of functional interconnections.
B. The overall master wiring diagrams are too complex to be understandable, so the presentation of the systems shall be simplified and the interconnections should be plainly noted.
C. To make the wiring diagrams simplified and understandable, the complex systems should be described in system-functions. The connection of each system shall be presented clearly.
A. 放出适量燃油。
B. 注入大量的滑油。
C. 加入所需量的滑油。
A. Stop the engine run-up practice.
B. Stop the engine start procedure.
C. Stop the engine ignition project.
A. 铝制品力矩值可以适用于铝、钢、或钛材料的安装力矩。
B. 对于安装在铝凸台上的铝、钢或钛配件，使用铝配件扭矩值。
C. 铝质安装台使用的力矩值，在铝、钢铁或钛合金制品固定连接时都适用。
A. Check whether the linkage moves slightly or not.
B. Examine the linkage for smooth movement.
C. Inspect the status of the linkage movement.
A. 段落之下设有子段落时，可参考本规范中子段落的编排顺序，无需完全遵守。
B. 如果一个段落包含分段落，那么本规范中分段落的呈现指令仅作为指导，不作为步骤遵循。
C. 如果一个段落包括若干子段落，那么本规范中子段落表述的指令仅作为指引而遵循。
A. If ordering any wire bundles from Boeing is mandatory, operators has the right to purchase the bundles from other supplier and ask them to provide the base wire bundle number (61-30396 in this case) and tail number of the airplane.
B. It is a necessity for the operators to provide the base wire bundle number (61-30396 in this case) and tail number of the airplane on which the bundle is to be installed if ordering any wire bundles from Boeing is necessary.
C. Operators should provide the number(61-30396 in this case) of the airplane where the bundles are to be installed on if ordering any wire bundles from Boeing is necessary.
A. 用设置开关以重置运行时间。
B. 用重置按钮以重置运行时间。
C. 用重置按钮以重置格林威治时间。
