A、 If the right engine stops, what position will APU servo valve stop at?
B、 If the right engine is not running,what position will APU bleed valve stop at?
C、 If the right engine stops, will APU servo valve stop at close position?
答案：B
A、 If the right engine stops, what position will APU servo valve stop at?
B、 If the right engine is not running,what position will APU bleed valve stop at?
C、 If the right engine stops, will APU servo valve stop at close position?
答案：B
A. The CAP compiler should determine the format and layout, it is desirable that the format and layout should be similar to the compiler＇s current documents.
B. The format and layout should be determined by the CAP producer, it is intended that the format and layout shall be similar to the producer＇s existing files.
C. The format and layout should be determined by the CAP producer, recognized that it is desirable the format and layout should be the same as the producer＇s existing documentaries.
A. 向前旋转手柄。
B. 向后移动水平面。
C. 向后移动手柄。
A. 原理图应倾向于处理整个系统，而不是附属系统。例如，空调系统，而不是空调系统内的压缩机。
B. 原理图应倾向于处理整个系统，而不是附件系统。例如，空调系统，而不是空调系统内的压缩机。
C. 原理图应尽量呈现整个总系统，而非各个子系统。例如，空调系统原理图不应把重点放在其中包含的压气机上。
A. Shall include dedicated tools, items and materials.
B. Common tools, equipment and materials shall include.
C. Special tools, equipment and materials shall be included.
A. 松散接头会造成损伤。
B. 错误连接会造成损伤。
C. 损伤的原因是松散连接。
A. If the values occur again, remove the unit.
B. If the symptoms occur again, remove the unit.
C. Remove the unit, until the symptoms occur again.
A. CAP不改变或替代任何规定，而是作为飞机维修手册或服务信函的一部分。
B. 建立CAP的意图并不是要改变或取代适用的飞机维修手册或服务信函的任何部分。
C. CAP对任何不适用于飞机维修的手册或服务信函部分做更改或替代。
A. 两个半圆形的挡板控制空气流。
B. 两个半导体的金属圈控制空气流。
C. 两个半圆形的金属圈控制空气流。
A. Always keep the brightness control on the LCD display at maximum.
B. Always keep the brightness knob of the LCD monitor set to its maximum dimness position.
C. Always adjust the test knob of the LCD monitor set to maximum brightness position.
A. Turn the body of the closure assist assembly with a wrench to pull the two thrust reverser doors together until you can engage the latches at the bottom of the doors.
B. Turn the main body of the closing aid with a crowfoot and pull the two throttle reverser doors together until you can connect the bolts at the bottom of the door.
C. Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reverse doors together until you can attach the locks at the bottom of the door.
