A、 The factory's policy of providing consulting remains unchanged.
B、 The factory has been maintaining technical and component support within the policy scope.
C、 The factory's policy on providing technical and component support has changed from the past.
答案:B
A、 The factory's policy of providing consulting remains unchanged.
B、 The factory has been maintaining technical and component support within the policy scope.
C、 The factory's policy on providing technical and component support has changed from the past.
答案:B
A. Adjust the tension in the wires to the correct value.
B. Adjust the tension in the cables to the correct value.
C. Adjust the torque in the cables to the correct value.
A. Clean all lint, dust and debris from the ventilation holes located on the aft side of the captain's primary flight, navigation, and center lower engine display units.
B. Clean the vent holes behind the captain's primary flight, navigation and lower middle engine display units which are blocked by lint, dust and debris.
C. The captain's primary flight, navigation, and center lower engine display units must be cleaned since the ventilation holes behind them are clogged by lint, dust and debris.
A. 为防止系统出现事故,安装安全锁。
B. 为防止系统意外运行,安装安全锁。
C. 安全锁定系统,以防止系统意外操作。
A. “前言”中可包含以下信息:(l)编制此CAP文件的原因以及此CAP文件旨在预防的潜在问题;(2)此 CAP文件与飞机正常检查大纲的关系。
B. “前言”可包含以下信息:(l) 建立CAP计划的原因,以及遵守特定CAP所要防止的基本问题;(2) CAP与飞机正常检查计划的关系。
C. “前言”可包含以下信息:(l)建立CAP计划的原因以及遵守特定CAP应防止的潜在问题;(2) CAP与飞机正常检查程序的关系。
A. 其他条款中给出了未在本节涉及的且法律要求的或局方允许或规定的任何限制的声明。
B. 其他限制提供了法规要求的或监管当局允许或批准的任何限制的说明,但本节未特别涉及。
C. 其他限定条款提供了任何限定条款的内容,这些内容是法规要求的或局方允许或规定的,未在本节特别说明。
A. You can use the past form of technical verbs as adjectives.
B. You can use the past tense form of technical verbs as adverbs.
C. You can use the past participle of technical verbs as adjectives.
A. 确定故障原因需要排除故障程序。
B. 执行故障排除程序以找出故障原因。
C. 根据故障排除程序,排除故障影响。
A. 这个能使推力管理更好,并且能够减少燃油消耗。
B. 这个能使推力管理更好,并且能够减少燃油吸收。
C. 这个能使更好的推力被应用,并且能够减少燃油消耗。
A. The IDG drives a constant-speed unit and an oil cooled generator.
B. The IDG includes a variable-speed drive and an fuel cooled generator.
C. The IDG consists of a constant-speed drive and an oil cooled generator.
A. The shim is t,which is thick by calculating x and y.
B. Calculate the shim,the result of the thickness is x-y .
C. The thickness of the shim is thus calculated: t=x-y.