A、 The main gear leg could be held by the side stay.
B、 The main gear leg could be hampered by the side stay.
C、 The main gear leg could be contained by the side stay.
答案：A
A、 The main gear leg could be held by the side stay.
B、 The main gear leg could be hampered by the side stay.
C、 The main gear leg could be contained by the side stay.
答案：A
A. Check the defect before you start the procedure again.
B. Rectify the defect before you start the procedure again.
C. Define the defect before you start the procedure again.
A. 武装位置是开关的通常位置。
B. 手臂对着的位置是开关的通常位置。
C. 该电门通常放置在预位位置。
A. Altitude meter shows the aircraft altitude relative to the horizon.
B. Attitude meter shows the aircraft attitude relative to the horizon.
C. Altitude meter shows the aircraft altitude relative to the level.
A. The unit of all range distances shall be nautical mile.
B. We measure all range distances in accurate miles.
C. The range of distances shall be calculated in knots.
A. The drain float valves in the vent tubes and the vent channels dilute the fuel in the vent system to drain out of the tank when the fuel face is lower than the valve.
B. The drain float valves in the vent tubes and the vent channels permit fuel in the vent system to drain into the tank when the fuel level is lower than the valve.
C. The drain float valves in the vent tubes and from the vent channels allow the fuel in the vent system to drain into the tank when the fuel quantity is lower than the valve.
A. At the manufacturer＇s option, static pressure systems description and discussion may be combined with Paragraph 7.49, Pitot Pressure Systems.
B. The manufacturer could combine the description and discussion of the dynamic pressure systems in Paragraph 7.49, Pitot Pressure Systems.
C. The manufacturer decides to insert static pressure systems description and discussion into Paragraph 7.49, Pitot Pressure Systems.
A. The function of the rules in this specification is to direct the revising of all materials that are contained in Maintenance Manuals prepared by manufacturers.
B. With respect to format, style and method of presenting for all materials which are contained in Maintenance Manuals prepared by manufacturers, you can refer to the rules that are included in this specification.
C. When presenting format, style and method for rules of this specification, all materials of Maintenance Manuals prepared by manufacturers shall be accorded with.
A. 步骤2仅适用于天气潮湿的情况。
B. 步骤2仅出现在于天气潮湿的情况。
C. 工卡2仅适用于天气潮湿的情况。
A. 如果电瓶需要断电，则断掉电源。
B. 如果电瓶需要充电，则继续接通电源。
C. 如果需要更换电瓶，则接通电源。
A. 打破了测量值的记录。
B. 打破了一个金属测量值的记录。
C. 对所有厚度测量值做记录。
