A、 The values must be less than the approved differences.
B、 The values must not exceed the allowable differences.
C、 The values must be less than the allowable differences.
答案:B
A、 The values must be less than the approved differences.
B、 The values must not exceed the allowable differences.
C、 The values must be less than the allowable differences.
答案:B
A. 一个生成器可以为所有系统提供电力。
B. 一个发电机可以为一台系统供电。
C. 一台发电机能够给所有系统供电。
A. 温度降低,钢索的拉力会减小。
B. 钢索上的张力会随着温度升高而增加。
C. 温度升高,钢索张力会减小。
A. “检查程序”用于列出要使用的检查程序,如磁性粒子、目视检查等,也可参考其他文件(如《无损检测手册》)中包含的程序。
B. “检查程序”用于规定要使用的检查程序,如磁粉检查、目视检查等,也可指向其他文件(如《无损检测手册》)中包含的程序。
C. “检查程序”用于规定要使用的检查程序,如磁粉检查、目视检查等,并可寻找另一个文件的实际程序,如无损检测手册。
A. Those instructions necessary to park or store the aircraft in normal or abnormal conditions such as with engines removed, aircraft damaged, etc.neither short-term nor long-term.
B. Instructions required for parking or storing the aircraft under normal or abnormal conditions, such as engine removal, aircraft damage, etc., which are used for short-term or long-term under extreme weather conditions.
C. Those instructions necessary to park or store the aircraft in normal or abnormal conditions such as with engines removed, aircraft damaged, etc.either short-term or long-term.
A. Replace the No. 1 and No. 2 computers. Then do the test again.
B. Interchange the No. 1 and No. 2 computers. Then do the test again.
C. Repair the No. 1 and No. 2 computers. Then do the test again.
A. 描述飞机发动机时,应描述有关发动机仪表的以下信息: 1.仪表操作方法 2.读数极限值和典型正常值(如适用)。
B. 描述飞机发动机时,应描述发动机仪表有关: 1.操作方法 2.读数限制和典型值(如适用)。
C. 描述飞机发动机时,应描述一下发动机仪表: 1.操作方法 2.限制读数以及典型值(如适用)。
A. 如果它明显地影响了巡航参数,重力的效果也应该纳入规划。
B. 如果它大大地改变了巡航表现,重量的效果也应该被考量。
C. 如果重量对巡航性能有显著影响,也应该将其影响列入计划。
A. 在可能的地方,将分号从定义和核准示例文本中删除是可行的。
B. 在可能和不得已的情况下,将标记符号从定义和示范示例的文本中删除。
C. 在可能和可行的情况下,将引号从定义和批准示例的文本中删除。
A. 铝制品力矩值可以适用于铝、钢、或钛材料的安装力矩。
B. 对于安装在铝凸台上的铝、钢或钛配件,使用铝配件扭矩值。
C. 铝质安装台使用的力矩值,在铝、钢铁或钛合金制品固定连接时都适用。
A. 该速度指示仪此段弧线的下限是着陆构型下的最大纵向速度。
B. 该速度指示仪此段弧线的下限是着陆构型下的最大横向速度。
C. 该速度指示仪此段弧线的下限是最大重量情况下着陆构型时的失速速度。