The torsion link assembly can transmit torsional loads from the axle to the shock strut.

A. 发动机防冰系统能消除和防止因引气产生的发动机部件结冰（不包括整流罩），包含活门、管路、调节器等零件。

B. 发动机防冰系统包括活门、管路、调节器等部件，能通过引气消除和预防发动机所有部件结冰（不包括整流罩）。

C. 发动机防冰系统是用于消除和防止发动机所有部件结冰的系统部分（不包括整流罩），包括活门、管路、调节器等项目。

A. 计算机计算偏离这些数值的能量消耗

B. 计算机根据这些值计算能源消耗

C. 计算机计算根据燃油价值来计算能量消耗目标。

A. Use schematics and drawings to briefly explain the operation of the system, including warning devices and control features during use.

B. Making use of simplified schematics and drawings explain how this system operates, including warning devices and control features in use.

C. The simplified diagrams and drawings are the indication of the system operation, including warning devices and control features in use.

A. 如果一个项目具有特别高的复杂性，需要专门的技术、测试设备或专业知识，则不要求将内部图和结构细节，或互联系统、维护、故障排除、检查或修理方面的数据，包括在基本机身维修手册中，对主要部件，如航空电子设备、特殊电子设备、发动机、螺旋桨等。

B. 当一个检查项目特别复杂，需要特殊的技术、测试设备或专业知识时，则无须将较大部件（如航空电子设备、特殊电气设备、发动机和螺旋桨等）的内部图和结构细节，或互联系统、维护、故障排除、检查或修理方面的数据等包括在基本的机体维护手册中。

C. 如果项目具有极高的复杂性，需要专门的技术、测试设备或专业知识，则内部图示和结构细节，或系统互连、维护、故障排除、检查或维修的资料，不需要包含在主要部件的基本机体维护手册中，如航空电子设备、专业电子设备、发动机、螺旋桨。

A. Do not reach this speed with a given flap setting.

B. Do not exceed this speed with a give flap setting.

C. Do not exceed this speed with a given flap setting.

A. 如果故障频繁出现，进行系统测试。

B. 如果故障定期出现，进行系统测试。

C. 如果故障随机出现，进行操作测试。

A. The operation rods are connected to the hydraulic feedback.

B. The operation barrels are connected to the hydraulic return.

C. The actuators are connected to the hydraulic return.

A. Do the troubleshooting procedure to find the cause of the malfunction.

B. Do the troubleshooting process to look the result of the malfunction.

C. Find the cause of the malfunction to do the troubleshooting procedure.

A. If the values occur again, remove the unit.

B. If the symptoms occur again, remove the unit.

C. Remove the unit, until the symptoms occur again.

A. Turn the drain valve counterclockwise to cause the fluid to stop flowing before the valve is pushed.

B. When you turn the drain valve counterclockwise, no fluid will flow until you push the valve in.

C. Make sure there is no fluid flowing after the valve is pushed, then turn the drain valve clockwise.