A、 飞机维修手册中的程序要满足持续适航的要求。
B、 包含飞机持续适航程序的主要文件是飞机维修手册。
C、 飞机的主要适航文件包含在维护手册中。
答案:B
A、 飞机维修手册中的程序要满足持续适航的要求。
B、 包含飞机持续适航程序的主要文件是飞机维修手册。
C、 飞机的主要适航文件包含在维护手册中。
答案:B
A. 为加快固化过程,对部件进行热处理。
B. 为加快风化过程,给化合物加热。
C. 为加快固化过程,给化合物加热。
A. 如图4所示,测量凹坑的深度。
B. 如图4所示,检查凹坑的尺寸。
C. 如图4所示,测量磨损的厚度。
A. 那些说明可以作为定期维修所必需的参考。
B. 那些指令是执行定期维护所必需的。
C. 这些指示必须进行有计划维修。
A. 将收发机放到主体组件上。
B. 将发射器放在主体组件上。
C. 将传感器放在主体组件上。
A. Use backthrust to change the direction of the exhaust to achieve contrary thrust.
B. Thrust reverser is used to change the direction of the exhaust gases for reverse thrust.
C. To change the direction of the exhaust nozzle, the thrust reverser is used to obtain the opposite thrust.
A. Before drill the hole, make sure that the point of the drill head is sharp.
B. Prior to drill the hole, make sure that the point of the drill bit is sharp.
C. Before you make the hole, make sure that the point of the drill bit is sharp.
A. 该程序应明确,在演示或训练识别一发不工作时的VMCA时,应从不小于VSSE的速度开始逐渐减速(约1节/秒),直至速度减小至VMCA或失速警告触发,以先到者为准。
B. 该程序应规定,为了演示或培训有意使一台发动机不工作的VMCA,应从VSSE速度开始逐渐降低速度(大约每秒1节),直到VMCA或失速警告,以先到者为准。
C. 该程序应规定,为了证明或训练VMCA的识别,故意使一台发动机不工作将速度从VSSE或以上逐渐降低(大约每秒1节),直到获得VMCA或失速警告(以先发生的为准)。
A. Use the marks on the bellcrank and shaft to identify them and prevent incorrect installation.
B. Mark the bellcrank and shaft so that they'll be identified and incorrect installation will not occur.
C. Put marks on the bellcrank and shaft or incorrect installation will occur.
A. 转动凸轮以使显示器松脱。
B. 转动旋钮使显示消失。
C. 转动把手以使显示器不再显示。
A. 水平和垂直稳定器包括升降舵和方向舵的结构。
B. 水平和垂直稳定剂包括升降舵和方向舵的结构。
C. 水平安定面和垂直安定面连接升降舵和方向舵结构。