A、 如果能简化、缩短文本或能使文本更容易理解,则应使用插图。
B、 应该使用插图,因为插图可以简化、缩短文本,并使文本更易理解。
C、 如果文本复杂、冗长或不易于理解,则应进行解释说明。
答案:A
A、 如果能简化、缩短文本或能使文本更容易理解,则应使用插图。
B、 应该使用插图,因为插图可以简化、缩短文本,并使文本更易理解。
C、 如果文本复杂、冗长或不易于理解,则应进行解释说明。
答案:A
A. The design authority must report all related questions about the repair plan.
B. The design authority must give approval to changes that you make to the repair scheme.
C. The design authority may reply the repair work that you will do according to the scheme.
A. 如果发现铜颗粒, 在发现之日起的30天内重复执行整个程序(机轮不承重)。
B. 如果发现金属碎屑,从即日起在30天内完成整个修理程序(机轮承重)。
C. 如果发现琥珀色指示参数,针对发现的数据在30天内重复所有程序(机轮离地)。
A. 描述飞机刹车系统时,应阐述如何最大程度地发挥刹停作用的同时延长刹车的最大寿命。
B. 描述飞机刹车系统时,应描述如何使用最大刹车以及最大程度地延长刹车的使用寿命。
C. 描述飞机刹车系统时,应阐述如何获得最大制动并制动器的最大寿命。
A. “前言”中可包含以下信息:(l)编制此CAP文件的原因以及此CAP文件旨在预防的潜在问题;(2)此 CAP文件与飞机正常检查大纲的关系。
B. “前言”可包含以下信息:(l) 建立CAP计划的原因,以及遵守特定CAP所要防止的基本问题;(2) CAP与飞机正常检查计划的关系。
C. “前言”可包含以下信息:(l)建立CAP计划的原因以及遵守特定CAP应防止的潜在问题;(2) CAP与飞机正常检查程序的关系。
A. 只要EEC有电,EGT就显示。
B. 只有当EEC有电时,EGT才显示。
C. 当EEC有电时,只有EGT显示。
A. 某些油箱被称为配平油箱,因为它们不仅储存燃油,也用于飞机配平.
B. 飞机上一些油箱用于储存燃油,一些油箱用于飞机配平,所以叫做配平油箱。
C. 飞机上用于储存燃油的油箱需要用空气进行配平.这个过程叫配平油箱。
A. 解释如何避免和注意燃油消耗。
B. 解释如何避免和注意燃油污染。
C. 解释如何避免和注意燃油泄漏。
A. The System/Chapter, sub-System/Section and Subject Number, the page number and date of issue will disappear in the lower left-hand corner, on the left-hand pages and the review date in the lower right-hand corner.
B. The System/Chapter, sub-System/Section and Subject Number, the page number and date of issue will appear in the lower left-hand corner, on the left-hand pages and the review date in the lower right-hand corner.
C. The System/Chapter, sub-System/Section and Subject Number, the page number and date of public will appear in the lower left-hand corner, on the left-hand pages and the revision date in the lower right-hand corner.
A. 气压高度指从标准大气压(29.92英寸高度)测量得到的值。由压力或气压高度计测得。它是排除位置和仪表误差的指示压力值。在本手册中,假定高度计仪器误差为零。
B. 气压高度指压力计或气压计高度计用于从标准海平面压力(29.92英寸汞柱)计算的高度。它是减去位置和仪器误差后的指示压力高度。在本手册中,高度计的仪器误差为零。
C. 气压高度指用气压高度表测量的(飞机)距离标准海平面(气压值29.92英寸汞柱)的高度。所指示高度是一种对位置误差和仪表误差修正后的高度。在本手册中,假定高度表仪表误差为零。
A. 打磨两条线之间的孔洞区域。
B. 在两条线的交点上钻一个孔。
C. 通过孔洞排空两条管路。