A、 自然的转换传感器在升降舵感觉和定中组件的右侧。
B、 自然的转移传感器是在升降舵感觉和中间组件的右侧。
C、 中立的转移传感器是在升降舵感觉和定中组件的右侧。
答案:C
A、 自然的转换传感器在升降舵感觉和定中组件的右侧。
B、 自然的转移传感器是在升降舵感觉和中间组件的右侧。
C、 中立的转移传感器是在升降舵感觉和定中组件的右侧。
答案:C
A. The mechanic removed the cable roller and examined the surrounded area in detail. No other defects were found.
B. The mechanic removes the cable rotor and examines the adjacent area in detail. No other defects are noted.
C. The mechanic removed pulley and inspected the surrounding area in detail with no other defects found.
A. 焊接时请带防护面罩。
B. 在焊接过程中,请使用保护罩。
C. 在焊接的程序中有使用防护屏的要求。
A. Make sure that the bolt heads are attached to the skin.
B. Make sure that the screw heads are connected with the metal.
C. Make sure that the fastener heads are flush with the skin.
A. 把上凸轮放到与拆下时所做标记一致的位置。
B. 上部卡箍安装的位置应该与拆卸标记保持一致。
C. 经同意后,对应拆卸时所作的标记将上部曲柄安装在位。
A. Apparently, the Supplement about the subject system or equipment, if installed, must be in the Pilot's Operating Handbook whenever applicable.
B. You shall know clearly that when the subject system or equipment is installed, the Pilot's Operating Handbook must always contain the related Supplement.
C. When the subject system or equipment is installed, you need to clearly identify the associated Supplement in the Pilot's Operating Handbook at all times.
A. 不同类别和型号的飞机在设计和复杂性上的差异对具体故障有很大影响。
B. 设计上的差异以及各种类型和型号的飞机的复杂性都对一个具体故障产生很大影响。
C. 各种类别和型号的飞机因设计不同导致其复杂性不同,飞机承担的主要功能也不同。
A. 拆除部件之前,给系统充气。
B. 安装部件之前,给系统释压。
C. 断开部件之前,给系统放气。
A. The cleaning/painting section should provide information concerning the material and program needed to clean and paint an area or areas, except for containing safety precautions needed to protect people and material.
B. The cleaning / paint section shall provide information unrelated to the material and procedure required to clean and paint one or more areas, and include the safety precautions required to protect personnel and material.
C. The cleaning/painting portion shall provide information as to material and procedure necessary to clean and paint an area or areas, and contain safety precautions necessary to protect personnel and material.
A. You can use the module to disassemble the disassembly fixture.
B. The module that you can use to disassemble is the disassembly fixture.
C. You can use the disassembly fixture to disassemble the module.
A. 不要改变路线的管道。
B. 不要改变管道的长度。
C. 不要改变管道的走向。