A、 通过最少两个全循环操作副翼,并操作至其最大行程。
B、 至少完整操作副翼两个全循环至其最大行程。
C、 操作副翼最小两个单位,至其最大行程。
答案:B
A、 通过最少两个全循环操作副翼,并操作至其最大行程。
B、 至少完整操作副翼两个全循环至其最大行程。
C、 操作副翼最小两个单位,至其最大行程。
答案:B
A. 故障隔离手册提供的信息可以用来标识、定位和纠正可能在飞机上发生的任何故障。
B. 故障隔离手册提供信息用于标识、定位和修正已经在飞机上发生的任何故障的信息。
C. 飞机上出现的任何故障信息都可以参照故障隔离手册提供的标识来定位并排故。
A. “检查合规性”规定了关于“何时”需要检查的说明,是否为重复性检查。同时说明是否需要根据初步检查结果进行额外的重复检查。
B. “检查合规性”给出了关于“何时”需要检查的说明,是否属于重复性检查。同时说明是否需要根据初始检查结果进行额外的重复检查。
C. “检查合规性”用于描述某检查需要实施的时间以及是否属于重复性检查,并说明是否需要基于初始检查结果进行额外的重复检查。
A. Accelerate Stop Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, to bring the airplane to a stop.
B. Accelerated stop distance refers to the distance required to promote an aircraft to a stipulated speed, assuming that engine failed occurs at that speed and the aircraft stops flying.
C. Accelerating stop distance is defined as the distance requiring to speed up an aircraft to a specific speed, assuming that engine failed at that speed and the aircraft stops flying.
A. 为了保证飞机的适航性,飞机被推荐了检查程序。
B. 推荐的检查方案随飞机一并交付,以保证其适航性。
C. 飞机交付了推荐的检查程序,以保持它们的适航性。
A. 使用符号代表电磁活门,显示该活门是否是弹簧加载到开位或关位。
B. 应针对电磁活门标明注意事项,说明该活门应该弹簧加载到开位还是关位。
C. 电磁活门应标有符号,表明该活门是弹簧加载到开位还是关位。
A. If you get an unwanted movement, do a test of the system.
B. If the move is not set up by you, verify the system.
C. If the removal is not what you want, test the system again.
A. 将导轨嵌放在轴上。
B. 将套筒放在支杆上。
C. 把吊环钩在钩环上。
A. 技术和程序是复制性能所需的,并应包括性能项目,其在达到预期飞机性能时需要特殊动作序列。
B. 复制性能所需的技术和程序应包括那些达到预期飞机性能需要特殊动作序列的性能项目。
C. 对于那些达到飞机预期性能需要特殊动作顺序的性能项目,应包括复制所述性能所需的技术或程序。
A. 对邻近区域做检查。
B. 对表面区域做检查。
C. 对内部区域做检查。
A. 这一报告系统并非用于取代《持续适航维修大纲(CAP)》未涵盖项目的常规沟通渠道。
B. 这个系统并不取代正常的沟通渠道,进而处理《持续适航维修大纲(CAP)》不涉及的项目。
C. 该报告系统不会阻碍《持续适航维修大纲(CAP)》未涵盖项目的正常交流。