A、 RESET测试电门用于减少故障历史。当VERFIY(通过)和绿色GO灯亮时, 按下RESET(复位)电门。
B、 RESET测试电门用于转移故障记录。当VERFIY(验证)和绿色GO灯打开时, 按下RESET(复位)电门。
C、 RESET测试电门用于消除故障记录。当VERFIY(确认)和绿色GO灯亮时, 按下RESET(复位)电门。
答案:C
A、 RESET测试电门用于减少故障历史。当VERFIY(通过)和绿色GO灯亮时, 按下RESET(复位)电门。
B、 RESET测试电门用于转移故障记录。当VERFIY(验证)和绿色GO灯打开时, 按下RESET(复位)电门。
C、 RESET测试电门用于消除故障记录。当VERFIY(确认)和绿色GO灯亮时, 按下RESET(复位)电门。
答案:C
A. The Preface has been omitted in the sample CAP in Section Ill and the necessary information has been included in the Objectives.
B. The Objectives of third CAP sample is omitted and the necessary information is included in the Preface description.
C. The necessary information has been included in the sample description, so the CAP III omitted the Objectives in the Preface.
A. Make sure that there is something in the pipe.
B. Make sure that there is nothing in the pipe.
C. Make sure that blockage is in the pipe.
A. Make sure that the position of the clamp agrees with the position that you recorded during the removal procedure.
B. Confirm that the recorded condition during the removal procedure agrees with the condition of the clamp.
C. Ensure that the clamp is correctly oriented based on the suggested position documented during the removal procedure.
A. 热电池汇流条通常接受动力,从主电池或者主电池转换器中。
B. 热电池组件通常接受动力,从主电池或者主电池充电器中。
C. 热电池汇流条通常从主电池或者主电池充电器中获得动力。
A. 描述飞机电源系统时,应阐述容量和装载减少。
B. 描述飞机电源系统时,应阐述电源的容量和卸载。
C. 描述飞机电源系统时,应阐述容量和载荷去除。
A. 封面标题和适当的飞机内容应首先在手册的封面或书脊(或两者)上表现出来。
B. 封面标题和适用的飞机设计应在手册的封面或书脊(或两者)上永久显示。
C. 封面标题和适用的飞机名称应突出显示在手册的封面或书脊(或两者)上。
A. Wrap two tapes around the pipe connectors.
B. Wrap the pipe joints with tape twice.
C. Wind two layers of tape around the pipe joints.
A. 安全扫描仪检测金属物体。
B. 保证扫描仪检测金属物体。
C. 安全扫描缺损金属物体。
A. If you use solvent in a closed space, make sure that there is good airflow in the work area.
B. When using composite in confined space, make sure it has good ventilation.
C. You can not use sealant in enclosed space on condition that there is no good ventilation.
A. This data sheet defines that the product, published by the type certificate, satisfies the airworthiness necessities complying with the conditions and limitations.
B. The product, for which the type certificate was approved, should reach the airworthiness requirements within conditions and limitations stipulating by this data sheet.
C. This data sheet regulates conditions and limitations of the airworthiness demands that the product, which has the qualified type certificate, should fulfill.