A、 The incorrect operation of the connection units will result in a dirty contact.
B、 A dirty contact in the connection units will cause them to operate incorrectly.
C、 Improper operation of the connection units might be attributed to a dirty contact.
答案：B
A、 The incorrect operation of the connection units will result in a dirty contact.
B、 A dirty contact in the connection units will cause them to operate incorrectly.
C、 Improper operation of the connection units might be attributed to a dirty contact.
答案：B
A. 在《持续适航维修大纲》检验编号中的章节编号的两位数字中，第一位数字由GAMA规范2号编号系统确定，第二位数字由制造商依次确定。
B. 在《持续适航维修大纲》检查编号的两位数字中，第一位数字由GAMA 2号规范编号系统决定，第二位数字由制造商按顺序决定。
C. 在《持续适航维修大纲》检查文件编号中代表节号的两位数字里，第一位数字应遵守GAMA 2号规范的编号体系，第二位数字由制造商按相应的顺序确定。
A. The factory＇s policy of providing consulting remains unchanged.
B. The factory has been maintaining technical and component support within the policy scope.
C. The factory＇s policy on providing technical and component support has changed from the past.
A. You can reassemble the horizontal stabilizer.
B. You can trim the horizontal stabilizer to the right angle.
C. You can adjust the incidence of the horizontal stabilizer.
A. If this specification is written in professional terms, the problems won＇t arise.
B. This specification agrees with recognized industry practices, and the problems can＇t be avoided according to this specification.
C. If this specification is written in professional terms, the problems will be treated adequately.
A. 飞机在地面上，主起落架和门是主要支撑的部分系统，包括诸如减震柱、转向轴、牵引支柱、门、连杆、连接螺栓等项目。
B. 主齿轮和门是飞机系统的一部分，在地面上提供主要支持。这个系统包括减震柱、转向轴、牵引支柱、门、连杆、连接螺栓等项目。
C. 主架和门是飞机在地面提供系统主要支撑的一部分，包括减震柱、转向轴、牵引支柱、门、连杆、连接螺栓等项目。
A. 将螺纹杆放入接头中
B. 将杆的一端缠上线放入接头中
C. 将杆的螺纹端放入接头中
A. Obey the procedure if there is no debris in the oil sample.
B. If the fuel is not polluted, go on with the procedure.
C. If there is no contamination in the fuel sample, continue the procedure.
A. The manufacturer may choose to include information on Unscheduled Maintenance Checks, including Time Limits/Inspections and Maintenance Checks, in a separate manual. Reference points must be listed in the maintenance manual.
B. For Unscheduled Maintenance Checks, the manufacturer will have the choice to separate the information of Time Limits/Inspections and Maintenance Checks in manuals. The manual can be the Maintenance Manual.
C. The information on Unscheduled Maintenance Checks should be provided in the Maintenance Manual including Time Limits/Inspections and Maintenance Checks. Whether to include these information in an other manual is at the manufacturer＇s option.
A. 为了从表格里提取准确的性能值，需要在中位数之间挑选。
B. 为了从表中获得准确的性能值，需要在增量值之间插值。
C. 为了从表中获取准确的性能值，需要评估增长的中间值。
A. Drain the used oil into a container.
B. Pump the used oil into a container.
C. Suck the used oil into a container.
