A、 最大起落架放下速度是指起落架放下状态下飞机可以安全飞行的最大速度。
B、 最大起落架收放速度是指起落架收放过程中飞机可以安全飞行的最大速度。
C、 最大起落架收上速度是飞机可以安全飞行的最大速度,起落架收上。
答案:A
A、 最大起落架放下速度是指起落架放下状态下飞机可以安全飞行的最大速度。
B、 最大起落架收放速度是指起落架收放过程中飞机可以安全飞行的最大速度。
C、 最大起落架收上速度是飞机可以安全飞行的最大速度,起落架收上。
答案:A
A. Because of the risk of contamination, you must do this task in a very clean environment.
B. To prevent environmental pollution, this task must be done in a very clean area.
C. In order to prevent contamination, the task you must do is to find a very clean environment.
A. 飞机交付后因进行改装而需要对《维护手册》进行修订时,由改装设计批准书持有人负责。
B. 因飞机交付后进行改装而需要对《维护手册》进行修订时,由型号设计改装批准者负责。
C. 由于飞机交付后的改装而需要对《维护手册》进行的任何修订,由改装的型号设计批准者负责。
A. 适航指令是从事飞机进行维修时必须使用的程序。
B. 在航空器上执行适航指令时,必须阅读本程序。
C. 适航指令必须是对飞机维修有用的程序。
A. Ensure you switch off the brown VALVE CLOSED light next to each switch.
B. Make sure the amber VALVE CLOSED light below each switch goes off.
C. The purple VALVE CLOSED light under each switch is confirmed off.
A. 结果是,孔的直径达到了允许的最大值。
B. 结果是,允许孔的尺寸超出最大范围。
C. 结果是,孔的尺寸大于允许的最大尺寸。
A. 工作准备总是第一个步骤,收尾或收工是最后一个步骤
B. 工作准备总是第一个步骤,收尾或收工是接下来的步骤
C. 第一个步骤有时是工作准备,收尾或收工是接下来的步骤
A. 制造商可以建立程序,对在遵守时发现的不适航的状况提供反馈。
B. 制造商可以发布程序,对发现的各种不适航的状况提供建议。
C. 制造商可以建立程序,对发现的各种不安全状况提供技术支持。
A. Get approval for all modifications from the design authority.
B. The design department is irresponsible for approving the changes.
C. The arrangement has to be approved by the design department.
A. A maximum distance of 50 feet is required between consumable materials and the work area.
B. Keep flammable materials at a minimum distance of 50 feet from the work area.
C. Explosive materials must be kept at least 50 feet away from the work area.
A. 与飞机相应的重量,包括类型的座椅和内部、航空电子设备、附件、标准设备和固定装置,以及基于该重量的典型空重和最大有效载荷。
B. 与飞机相应的重量,包括典型座椅和内部、航空电子设备、附件、标准设备和固定压舱物,以及基于该重量的典型空重和最大有效载荷。
C. 与飞机附加的重量,包括典型座椅和内部、航空电子设备、附件、标准设备和固定装置,以及基于该重量的典型空重和最大有效载荷。