A、 CAP检查列出制造商建议的零件或组件的报废时间(使用小时数、循环或其他适当的决定因素)和FAA要求的关于时寿零件或组件的报废(维护拆换)时间。
B、 CAP检查设定四家推荐的制造商的零件或组件退役时间(使用时间、周期或其他适当的计算方法)和FAA要求的时间限制零组件的退役(维护拆换)时间。
C、 CAP检查包在建议的厂家零部件退役时间(使用时间,周期或其他合适的计量因子)和FAA要求的零部件退役(不服役)时间后进行。
答案:A
A、 CAP检查列出制造商建议的零件或组件的报废时间(使用小时数、循环或其他适当的决定因素)和FAA要求的关于时寿零件或组件的报废(维护拆换)时间。
B、 CAP检查设定四家推荐的制造商的零件或组件退役时间(使用时间、周期或其他适当的计算方法)和FAA要求的时间限制零组件的退役(维护拆换)时间。
C、 CAP检查包在建议的厂家零部件退役时间(使用时间,周期或其他合适的计量因子)和FAA要求的零部件退役(不服役)时间后进行。
答案:A
A. 检验/查找部分应提供访问和检验或查找系统、单元或区域所需的信息和程序。
B. 检验/检查部分应提供接近和检验或检查系统、装置或区域所需的信息和程序。
C. 监控/检查部分应提供访问和监控或检查系统、装置或区域所需的信息和程序。
A. The temperature decreases - 0.00198°C per foot from sea level to the altitude at which the temperature is -56.5°C and zero above that altitude.
B. The temperature gradient from sea level to the altitude at which the temperature is -56.5°C is - 0.00198°C per foot and zero above that altitude.
C. The temperature drops 0.00198°C per foot from sea level to the altitude at which the temperature is -56.5°C and to zero above that altitude.
A. 分步执行这两个步骤。
B. 依次执行这两个程序。
C. 同时做这两个步骤。
A. The wing tanks and the center tank have the same rate of supply of fuel.
B. The rate of supply of fuel from the wing tanks to the center tank is equal.
C. The fuel supply rate from all wing tanks and the center tank is the same.
A. 自动油门里有起激活、感知、计算、信号放大、控制、作动和警告作用的设备,例如放大器、计算机、伺服器、限位开关、轴、齿轮箱、警告灯等。
B. 自动油门里有起连接、感知、计算、信号放大、控制、作动和警告作用的设备,例如放大器、计算机、伺服器、限位开关、轴、齿轮箱、警告灯等。
C. 自动油门里有起接通、感知、计算、信号放大、控制、作动和警告作用的设备,例如放大器、计算机、伺服器、限位开关、离合器、齿轮箱、警告灯等。
A. If one or more blades are broken, make an entry in the engine logbook.
B. If one or more blades are in place , make an entry in the engine logbook.
C. If one or more blades are absent, make an entry in the engine logbook.
A. When it is unlikely that the temperature decreases to -20 ℃, remove the batteries.
B. If it is possible that the temperature will decrease to -20 ℃, remove the batteries.
C. If it is possible that the temperature will decrease to -20 ℃, cut the cells.
A. Use the rigging pin to lock the pulley.
B. Use the pulley to lock the rigging pin.
C. The rigging pin should be locked by the pulley.
A. “细节要求”部分给特殊材质的物品进行整理和排序提供特定方法。
B. “具体要求”部分描述了特殊材料的实体的一致性布局和辨别的方法。
C. “详细要求”部分提供了编排和标识特定主题材料的统一方法。
A. There is enough oil.
B. Some oil must be drained.
C. More oil must be added.