A、 Airspeeds used in this Section shall be specified in Indicated Airspeed, assuming zero instrument error, in order to make the information as directly usable as possible.
B、 This Section shall use Indicated Airspeed as Airspeed, i.e. the instrument is mostly accurate, so the information can be used directly.
C、 Airspeed used in this Section shall be defined as Indicated Airspeed, that is, the instrument is almost right, so as to make the information possibly be used directly.
答案：A
A、 Airspeeds used in this Section shall be specified in Indicated Airspeed, assuming zero instrument error, in order to make the information as directly usable as possible.
B、 This Section shall use Indicated Airspeed as Airspeed, i.e. the instrument is mostly accurate, so the information can be used directly.
C、 Airspeed used in this Section shall be defined as Indicated Airspeed, that is, the instrument is almost right, so as to make the information possibly be used directly.
答案：A
A. Transfer the rod in the contrary directivity.
B. Remove the rod in the contrast direction.
C. Move the rod in the opposite direction.
A. 所有在此区域人员必须使用护目镜。
B. 所有在此区域人员必须使用防护服。
C. 所有在此区域人员必须使用呼吸设备。
A. 如果安装了某一个设备，那么要说明安装它的重要性。
B. 如果安装了其中一个设备，则说明它是否是必需的设备。
C. 如果安装了两个设备，需要说明其必要性。
A. Procedures shall be provided for starting the engine in air and, moreover the engine does not start, for subsequent.
B. Procedures shall be provided for starting the engine in flight and, in the event the engine does not start, for subsequent.
C. Procedures shall be provided for starting the engine in flight and, for instance the engine does not start, for preceding.
A. Restrictions on use of cabin pressurization during Takeoff, landing, or in flight shall be noted
B. That portion of the system is used to de-ice all airfoil surfaces once ice is formed.
C. All airfoil surfaces are equipped with that portion of the system to stop ice formation.
A. 如果使用折页，折叠时页码必须可见。
B. 如果扉页被折叠，页码必须可以看见。
C. 当页面被折起，折叠页上可能会看到使用的编号。
A. Count the velocity in the circuit.
B. Compute the current in the route.
C. Calculate the voltage in the circuit.
A. The Design Authority is responsible for approving and changing the repair procedure.
B. Any alteration to this repair procedure must get verbal approval of the Design Authority.
C. If you change this repair procedure, get approval of the Design Authority.
A. Maintenance should be accomplished preventively in accordance with the airplane service or maintenance manual.
B. Appropriate airplane service or maintenance manual shall be developed for the accomplishment of preventive maintenance.
C. Preventive maintenance should be accomplished in accordance with the appropriate airplane service or maintenance manual.
A. The manufacturer shall include a description of the type service information issued by the manufacturer and the office or department to contact to get such information that the aircraft may be maintained in accordance with the latest information.
B. The manufacturer shall include a description of the type service information issued by the manufacturer and the office or department to contact to obtain such information so that the aircraft may be maintained in accordance with the latest informatio
C. The factory shall include a description of the type service information issued by the manufacturer and the office or department to contact to obtain such information so that the aircraft may be maintained related to the latest information.
