The incorporation of an Abnormal Procedures Section in Handbooks is encouraged.

A. 最常见的的错误是发生在将油量单位从夸脱转换成加仑的极限装载检查中。

B. 在极限装载检查中，最常见的的错误是没有将滑油单位从夸脱转换成加仑。

C. 在极限装载检查中，最常见的错误是把滑油单位从夸脱转换成加仑。

A. 短距和软地着陆时的正常操作程序

B. 正常操作程序下的短场和软场着陆

C. 短地和软地着陆的正常通告程序

A. This tool is mandatory.

B. This tool is optional.

C. This tool is necessary.

A. 检验/查找部分应提供访问和检验或查找系统、单元或区域所需的信息和程序。

B. 检验/检查部分应提供接近和检验或检查系统、装置或区域所需的信息和程序。

C. 监控/检查部分应提供访问和监控或检查系统、装置或区域所需的信息和程序。

A. 松散接头会造成损伤。

B. 错误连接会造成损伤。

C. 损伤的原因是松散连接。

A. The manufacturer may choose to include information on Unscheduled Maintenance Checks, including Time Limits/Inspections and Maintenance Checks, in a separate manual. Reference points must be listed in the maintenance manual.

B. For Unscheduled Maintenance Checks, the manufacturer will have the choice to separate the information of Time Limits/Inspections and Maintenance Checks in manuals. The manual can be the Maintenance Manual.

C. The information on Unscheduled Maintenance Checks should be provided in the Maintenance Manual including Time Limits/Inspections and Maintenance Checks. Whether to include these information in an other manual is at the manufacturer＇s option.

A. Any anomaly should be reported to ABC, through the Condition Reporting System, so that additions and/or revisions can be made to the CAP where deemed necessary.

B. Report any abnormality to ABC by the Condition Reporting System to verify supplement and/or revisions needed as necessary to the CAP.

C. ABC shall receive the anomalies report from the Condition Reporting System for CAP to add and/or revise as necessary.

A. 压力电门用于连接单个泵出口来指示泵的状态。

B. 连接着单个泵出口的压力电门用于指示泵的状态。

C. 压力电门连接的单个泵出口用于指示泵的状态。

A. 在需要折叠的页面上，折叠时不允许页码可见。

B. 在需要折叠的页面上，以允许页码可见的方式折叠。

C. 在需要折叠的页面上，以这样的态度来折叠，并保证页码可变。

A. 应该提供手册中使用的符号、缩略语和术语的定义或解释。

B. 应该定义并解释符号，并提供手册中术语和缩略语的使用方法。

C. 应该用手册来定义和解释符号，缩略语，术语的使用。