A、 更换零件的话,要持续处于低气压状态。
B、 如果持续处于低气压状态,就需要维修零件。
C、 如果低压状态持续,则更换组件。
答案:C
A、 更换零件的话,要持续处于低气压状态。
B、 如果持续处于低气压状态,就需要维修零件。
C、 如果低压状态持续,则更换组件。
答案:C
A. 确保不要使用不相关的单词,因为这将改变短语动词的意思。
B. 确保不要将无关的单词连在一起,因为这会改变名词词组的意思。
C. 确保不要连用意思相反的单词,因为这会改变固定搭配的意思。
A. Clean the elastic surfaces that are transparent.
B. Clean the plastic surfaces that are not transparent.
C. Clean the plastic surfaces that are not vague.
A. 来自压气机的空气与来自燃油喷嘴的燃油在燃烧室混合。
B. 从压气机出来的空气和燃油在燃烧室混合。
C. 从压气机出来的空气和从燃油喷嘴出来的燃油在燃烧室燃烧。
A. 任何关于最大乘客座位的规定,例如对乘客数量或座位占用特别要求,都应给予说明。
B. 任何对最大乘客座位数量的规定都应声明,是按照乘客人数规定,或是按照座位占用特别规定。
C. 针对最大乘客座位数量的任何限制都应加以说明,包括乘客人数或座位占用的具体限制。
A. Make sure that the bolt heads are attached to the skin.
B. Make sure that the screw heads are connected with the metal.
C. Make sure that the fastener heads are flush with the skin.
A. An alphanumeric identifier is an assembly of characters and numbers. It can recognize something.
B. An symbolic-numeric identifier is an assembly of symbols and numbers. It can identifies something.
C. An alphanumeric identifier is a combination of letters and numbers that identifies something.
A. 水平和垂直稳定器包括升降舵和方向舵的结构。
B. 水平和垂直稳定剂包括升降舵和方向舵的结构。
C. 水平安定面和垂直安定面连接升降舵和方向舵结构。
A. Each revision and the effective page should be logged in the logbook.
B. Only the effective revisions pages need to be recorded in the manual.
C. Each manual shall have a record of revisions or effective pages.
A. 识别出有代码的部件,可以帮助再次正确安装。
B. 用编码标识复合材料,以帮助再次正确安装。
C. 用代码标识部件,以帮助正确地再次安装。
A. 把上凸轮放到与拆下时所做标记一致的位置。
B. 上部卡箍安装的位置应该与拆卸标记保持一致。
C. 经同意后,对应拆卸时所作的标记将上部曲柄安装在位。