A、 胎压波动会降低轮胎冷却的速度。
B、 当轮胎冷却后胎压会减小。
C、 胎压受到温度因素的影响。
答案：B
A、 胎压波动会降低轮胎冷却的速度。
B、 当轮胎冷却后胎压会减小。
C、 胎压受到温度因素的影响。
答案：B
A. The swivel nuts on both valves engage threads on an internal stem that loosens or draws tight the valve stem to a metal seat.
B. The rotating nuts on both valves are meshed with the threads on the inner valve stud, so that the valve stud is loosened or tightened to a metal valve base.
C. The swing nuts on both valves engage with the threads on the internal spool, allowing the spool to loosen or tighten to the metal seat.
A. 对于飞机维修中的行为，法规中规定的要求很重要。
B. 了解法规的要求对于飞机维修来说非常重要。
C. 在飞机维修活动中，遵守法规是非常重要的。
A. 转矩表是指显示传动轴上可用的输出转矩的指示系统。扭矩可能显示为维度的尺寸，例如英尺-磅，或者参考定义，用百分比或压力值表示。
B. 扭矩表是指显示传动轴上可输出的扭矩指示系统。扭矩可以用尺寸来表示，如英尺-磅，也可以用百分数或压力等参考术语表示。
C. 扭矩表显示传动轴可以输出的扭矩指示系统。扭矩可以用尺寸表示，如英尺-磅，或是用百分数、压力等参考术语表示。
A. This procedure does not include the removal of the cylinder.
B. This procedure does not exclude the removal of the piston.
C. This procedure does not include the removal of the piston.
A. 后缘襟翼有25个以上的组件。
B. 后缘襟翼超过25个单位。
C. 前缘襟翼超过25个单位。
A. The following safety precautions can be used to avoid explosion.
B. The safety measures that follow are available to inflammable items.
C. The safety precautions that follow are applicable to explosive items.
A. Sometimes, FAA and other airworthiness authority may accept the Continuing Airworthiness Program that uses the Specification.
B. Sometimes, we use the Specification to prepare a Continuing Airworthiness Program that will be accepted by non-FAA airworthiness authority.
C. Sometimes, during preparing a Continuing Airworthiness Program, using the Specification may be accepted by FAA and other airworthiness authority.
A. Aluminum wire should not be attached to engine mounted accessories or used in areas having corrosive fumes, severe vibration, mechanical stresses, or where there is a need for frequent disconnection.
B. Aluminum line should not be connected to attachments which are mounted on the engine and also not be applied in domains where corrosive gases, serious oscillation, mechanical forces exist or where it is necessary to disconnect frequently.
C. Aluminum cable should not be linked to accessories installed on the engine. It should also not be used in the event of corrosive fumes, serious vibration, mechanic loads or the place where frequent disconnections are required.
A. Examine the transformer of the floor panel.
B. Examine if the floor panel is laminated.
C. Examine the floor panel for deformation.
A. 找到中点，然后将测量出的数据除以2。
B. 为找到中点，将测量出的间隙除以2。
C. 找到中点，用2除以测量出的间隙。
