Supply containers of sufficient capacity and diameter.

A. Solenoid valves shall be shown with a notation. The notation indicates the spring is loaded by the valve to the open or closed position.

B. Solenoid valves shall be shown with a symbol. The valve indicates whether the valve is spring-loaded to the open or closed position.

C. Solenoid valves shall be shown with a mark. The mark indicates whether the valve is spring-loaded to the open or closed position.

A. 该部件中的空气循环使得特定部件的温度不超限。

B. 某些部件的温度不超限因此该部件中的空气能够流动。

C. 该部件中的空气的旋转和特殊部件的温度均不超限。

A. 将管子截成正确的角度。

B. 将管子放置在正确的位置。

C. 把管子弯到正确的半径。

A. 逆时针转动调节器60度。

B. 逆时针旋转调节器时应当增加60度。

C. 逆时针旋转调节器，每次增量60度。

A. Each system is composed of basic components and all equipment, mechanic controls and system related electric and hydraulic units.

B. Basic components and all apparatus are made up of each system, including mechanical controls and electrical and hydraulic units related sytem.

C. Each system includes the basic components and all instruments, mechanical controls, electrical and hydraulic units related to the system.

A. For data about the location of circuit breakers, refer to the wiring list.

B. Refer to the wiring list about the adapters location data.

C. For data about the location of circuit breakers, refer to the wiring diagram.

A. Remove the middle bellcrank unit.

B. Remove the moderate dualcrank unit.

C. Remove the middle doublecrank unit.

A. 这种冷却剂与金属不兼容。

B. 这种冷却剂与铝合金不兼容。

C. 这种冷却剂与钛合金不兼容。

A. Accelerate Stop Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, to bring the airplane to a stop.

B. Accelerated stop distance refers to the distance required to promote an aircraft to a stipulated speed, assuming that engine failed occurs at that speed and the aircraft stops flying.

C. Accelerating stop distance is defined as the distance requiring to speed up an aircraft to a specific speed, assuming that engine failed at that speed and the aircraft stops flying.

A. 曲线半径必须至少为8mm。

B. 圆的直径必须最小为8mm。

C. 曲线的直径必须最大为8mm。