A、 去除腐蚀以及表6001中提及的化学污染。
B、 用表6001中规定的化学剂去除腐蚀。
C、 清除表6001中提及的化学脱胶情况。
答案:B
A、 去除腐蚀以及表6001中提及的化学污染。
B、 用表6001中规定的化学剂去除腐蚀。
C、 清除表6001中提及的化学脱胶情况。
答案:B
A. After finishing the following procedure, repair the upper flange.
B. Repair the lower flange first during the procedure that follows.
C. Repair the upper flange first during the following procedure.
A. 涡轮间隙控制传感器提供高压涡轮的温度数据给EEC。
B. 涡轮间隙控制传感器提供来自高压涡轮保护罩的EEC温度数据。
C. 涡轮间隙控制传感器提供高压涡轮保护罩的温度数据给EEC。
A. The cover contains manufacturer's information and will be subject to its discretion.
B. The cover is determined by the manufacturer and the information should be comprehensive.
C. The information to be included on the cover will be left to the manufacturer's discretion.
A. 在修订文件时,应提供修订页和相关的有效列表。
B. 在修改基本文件时,应提供相应的修订页面和相关的有效页面列表。
C. 当修改基本文件时,应尽可能提供适当的修改页面和有关的有效页面清单。
A. Replace the defective booster pump.
B. Remain the present booster pump.
C. Recharge the failed booster pump.
A. 在某些情况下,延长检查频率可能会对疲劳检查造成不足,从长远讲会造成实际飞行小时数低于最初预测。
B. 在某些情况下,如果数据表明疲劳问题发生在比最初预测的飞行小时数更多,则可以放缓检查频率。
C. 在某些情况下,延长实际飞行小时将影响疲劳检查,因此会造成维修检查的小时数远低于最初预测。
A. 将装置连接到液压测试仪表上。
B. 将配件装到液压试验器上。
C. 将接头连接到液压测试台。
A. 特殊尺寸应显示在图形中。
B. 详细尺寸应显示在图纸上。
C. 主要尺寸应显示在图纸上。
A. 在此过程中,使用12英寸螺刀手柄。
B. 在此过程中,使用12英尺扳手手柄。
C. 在此过程中,使用12英寸扳手手柄。
A. Ensure that you do activate the control adjacent to it.
B. Adjust the adjacent control for optimal results.
C. Make sure that you do not operate the adjacent control.