Give temporary protection to areas of bare metal.

A. Do a hardness test for turning tool.

B. Conduct a hardness test for the carbide insert.

C. Take a hardness test for the chuck.

A. 确保那些指示的位置是襟翼的位置。

B. 确保指示与襟翼的位置一致。

C. 确保那些迹象同意襟翼的位置

A. 其他信息可能会显示在封面上。

B. 其他信息可能会在盖板上留下。

C. 其他信息可能会显示在目录上。

A. All the related data shall be grouped in a logical manner.

B. A logical method is required to group the unconcerned data together.

C. Divide all the involved data into groups logically.

A. 警告和注释可用来突出或强调重要的内容。

B. 警告、谨慎和注意可用来突出或强调重点要点。

C. 警告、告诫和注意可用来突出或强调重点要点。

A. If you find metal particles in the pump, find their source and repair the defective part.

B. If magnetic particles are found in the pump, locate their location and repair the affected part.

C. Locate their source and disassemble the defective part if you find metal objects.

A. 松开断路测试开关。

B. 复位短路测试开关。

C. 松开短路测试开关。

A. Take the oxygen mask in a hurry to start the flow of oxygen.

B. Pull the oxygen mask with a sudden movement to start the flow of oxygen.

C. Pull the oxygen mask in a must to start the flow of oxygen.

A. Make sure that the position of the clamp agrees with the position that you recorded during the removal procedure.

B. Confirm that the recorded condition during the removal procedure agrees with the condition of the clamp.

C. Ensure that the clamp is correctly oriented based on the suggested position documented during the removal procedure.

A. The paper must include a three-looking picture of the unit.

B. The report must inclue a three- view drawing of the unit.

C. The diagram must include a three-side drawing of the unit.