A、 应提供重量平衡装载表,同时提供相关计算程序的解释说明
B、 应提供重量和平衡载荷表以及说明计算程序。
C、 应提供重量和平衡载荷表以及计算步骤说明。
答案:A
A、 应提供重量平衡装载表,同时提供相关计算程序的解释说明
B、 应提供重量和平衡载荷表以及说明计算程序。
C、 应提供重量和平衡载荷表以及计算步骤说明。
答案:A
A. 当您提供液压时,确保操纵杆不会接触停止(1)。
B. 当您施加液压时,确保连杆不接触止动块(1)。
C. 当您使用液压时,确保操纵杆不接触止动块(1)。
A. Use a filter to remove unwanted material from the oil.
B. Use a valve to remove unwanted material from the gas.
C. Use a filter to remove unwanted material from the fluid.
A. 当反推收回时,确保飞机远离人员。
B. 当反推放出时,确保人员远离飞机。
C. 当反推运动时,确保人员远离飞机。
A. You can use the module to disassemble the disassembly fixture.
B. The module that you can use to disassemble is the disassembly fixture.
C. You can use the disassembly fixture to disassemble the module.
A. After a continued airworthiness process,almost every component composed of an airplane is involved in some form of preservation,inspection,preventative maintenance, overhaul,repair, and/or replacement activity.
B. Through a continuing airworthiness process, virtually every component comprising an airplane is involved in some form of preservation,inspection,preventative maintenance,overhaul, repair, and/or replacement activity.
C. Through a continuing airworthiness process, substantially every component of an airplane is excluded in some type of preservation,inspection,preventative maintenance, overhaul,repair, and/or replacement activity.
A. 本程序给出了不同的扭矩范围以及相应的规定。
B. 本文件给出了不同的扭矩值和其适用的条件。
C. 本程序给出了适用的差异扭矩值和条件。
A. 显示连接点的位置,转弯半径的图解应包括在内。
B. 附着点的位置和转弯半径应包括插图。
C. 插图显示连接点的位置还包括转弯半径。
A. Sample the fluid to contaminate microbiology.
B. Do a fuel sampling for microbiological contamination.
C. Obtain a demo of oil to determine the microbial pollution.
A. Proper recipe shall be adopted to measure the pressure.
B. The pressure shall be estimated by using accurate equation.
C. Calculate the pressure with the applicable formula.
A. Oxygen occurs occasionally.
B. Oxidation occurs very easily.
C. Oxygen happens very easily.