Station refers to a location along the airplane fuselage usually given in terms of distance from the reference datum.

A. The supplements of CAP are the airplane＇s maintenance manual (or Instructions for Continuing Airworthiness). The CAP is the primary document containing the aircraft＇s continuous airworthiness procedures.

B. The airplane＇s maintenance manual (or Instructions for Continuing Airworthiness) serves as the main document that contains the procedures to ensure the continuing airworthiness of the airplane. CAP is a supplementation to the manual.

C. CAP supplements the airplane＇s maintenance manual (or Instructions for Continuing Airworthiness). The supplements are the major document and involve in the procedures for the continuing airworthiness of the airplane.

A. 松开断路测试开关。

B. 复位短路测试开关。

C. 松开短路测试开关。

A. Check the bypass valves.

B. Close the isolating valves.

C. Inspect the check valves.

A. 每本手册应有修订日志或有效页，列出所有修订部分或有效页，紧跟在标题页之后。

B. 每本手册紧接标题页之后，应有修订登录或有效页，列出所有修订部分或有效页。

C. 每本手册应有修订记录或有效页记录，紧接在标题页之后，列出所有修订或有效页。

A. Pull out the circuit breaker.

B. Push in the circuit breaker.

C. Remove the circuit breaker.

A. This system is used to assist or avoid the formation of ice on masts and fairings.

B. This system is used to eliminate or prevent the formation of ice on antennas and radomes.

C. This system is used to get rid of or escape the formation of ice on probes and domes.

A. Check the fluid prior to mixing.

B. Prior to checking the fluid, ensure it has been mixed.

C. Never mix the fluid before testing.

A. 在铝合金部件上不要使用藏红花布，它含有氧化铁，在铝合金部件上会造成划痕。

B. 在铝质部件上不要使用细砂布，细砂布含有氧化铁，在铝质部件上会造成腐蚀。

C. 在铝合金部件上不要使用细砂布，细砂布含有氧化铁，在铝合金部件上会造成腐蚀。

A. 每本手册都应有导言，内容除了包括厂家技术出版物清、或清单的参考位置以外，还需简要说明手册的组织、内容和使用方法。

B. 每本手册都应包括介绍，简要说明其组织机构、手册内容和手册使用方法。额外的清单或参考清单位置要包括在制造商技术出版物中发布。

C. 每本手册都应有前言，其中要说明机构、内容，以及除了制造商技术出版物清单、清单位置的引用手册使用方法做简要说明。

A. Make the panel display a warning notice in order to reveal the operation of the controls.

B. Tag a warning notice on the panel to remind the operation of the controls.

C. Put a warning notice on the panel to prevent operation of the control.