A、 点火部分包括感应振荡器、磁电机、开关、主过滤器、分配器、线束、火花塞、点火继电器、激励器和提前点火的电气部分。
B、 点火部分包括感应振动器、磁电机、开关、铅过滤器、分配器、线束、插头、和火花提前的电气部分。
C、 点火部分包括感应振动器、开关、铅过滤器、分配器、线束、插头、点火继电器、激励器和火花提前的电气部分。
答案:A
A、 点火部分包括感应振荡器、磁电机、开关、主过滤器、分配器、线束、火花塞、点火继电器、激励器和提前点火的电气部分。
B、 点火部分包括感应振动器、磁电机、开关、铅过滤器、分配器、线束、插头、和火花提前的电气部分。
C、 点火部分包括感应振动器、开关、铅过滤器、分配器、线束、插头、点火继电器、激励器和火花提前的电气部分。
答案:A
A. The airworthiness problem needs to be resolved by the way any other airplane does in the operator's fleet has equal or more damaging corrosion, and it has to be done before the regular check of that zone.
B. The airworthiness problem needs immediate action ahead of the next planning inspection of that zone, because it would probably occur on another plane in the operator's fleet, causing equivalent or more serious corrosion.
C. Due to any other airplane in the operator's fleet could have the comparable or more vital corrosion, the airworthiness problem should be investigated immediately before the next periodic inspection of that zone.
A. 如果杠杆锁定电磁阀在锁定位置失效,你可以移动起落架控制杆到向上的位置与并用杠杆锁定覆盖触发器。触发器缩回控制杆向前的部分,这样它可以清除杠杆锁定机制。
B. 如果起落架控制手柄锁电磁阀在锁定位出现故障,可通过手柄锁超控触发器将控制手柄移动到向上位置。触发器将控制手柄的前半部分收回,这样就解除了手柄的锁定装置。
C. 如果杠杆锁定电磁阀没有处于锁定位置,则在手柄锁定超控触发器情况下将起落架控制手柄移动到向上位置。 触发器将控制杆的前部缩回,从而解除控制杆锁定机制。
A. Obtain approval from the design authority after making any changes to this repair procedure.
B. Prior to modifying this repair procedure, obtain the approval of the design authority.
C. Ensure that the design authority approves nonessential alterations made to this repair procedure.
A. 内部喇叭打到开位并且保持在开位,当探测器有动力的时间够长,并且烟雾传感器探测到烟雾。
B. 只有探测器有电,并且烟雾传感器探测到烟雾,内部开关才会打开到开位并且保持在开位。
C. 只要探测器有电源并且烟雾传感器探测到烟雾,内部的喇叭就会打开并且保持在开位。
A. 用真空清洁器和刷子清洁设备的内部及其底座。
B. 用真空清洁器和刷子清洁设备的外表面以及安装架。
C. 真空清洁设备及硬件设施的表面涂层。
A. 大翼的主要结构框架包括梁、肋、桁条、燃油箱整体结构、翼尖油箱支撑结构和开口周围结构。
B. 大翼的主要框架包括隔框、肋、加强筋、内部燃油箱结构、翼尖油箱支撑结构和结构周围的开口。
C. 大翼的主要结构包括翼梁、隔框、肋条、内部燃油箱结构、翼尖油箱支撑结构和结构周围的开口。
A. When it is unlikely that the temperature decreases to -20 ℃, remove the batteries.
B. If it is possible that the temperature will decrease to -20 ℃, remove the batteries.
C. If it is possible that the temperature will decrease to -20 ℃, cut the cells.
A. 当施加在相同方向的压力值大于预设值时开始工作。
B. 当适用于反方向的压力值大于极限值时开始工作。
C. 当施加在反方向的压力值大于预设值时开始工作。
A. 确保轴承安装正确。
B. 确保部件安装正确。
C. 确保齿轮是正确的安装。
A. The elevator is used for yaw control.
B. The rudder is used for yaw control.
C. The rudder is used for pitch control.