A、 校正空速是指经过位置调整以及仪表调整后的指示空速。
B、 校准空速指修正了仪表误差和位置误差之后得到的指示空速。
C、 校准空速是指调节位置误差以及仪表误差后的指示空速。
答案:B
A、 校正空速是指经过位置调整以及仪表调整后的指示空速。
B、 校准空速指修正了仪表误差和位置误差之后得到的指示空速。
C、 校准空速是指调节位置误差以及仪表误差后的指示空速。
答案:B
A. Landing and Taxiing Aids include items such as localizer, glide slope, ILS, markers, ground guidance systems, etc.
B. Landing and Taxiing Aids include items such as localizer, sliding way, ILS, markers, landing navigation system, etc.
C. Landing and Taxiing Aids include items such as localizer, sliding way, instrumental system, markers, ground lighting system, etc.
A. The description could be pronounced in the active voice.
B. Descriptive content can be written in active voice.
C. You should read it in voice as you write the descriptive text.
A. Put a plug on the open end of each pipe.
B. On the opening of each pipe, put a cover.
C. Put a cover on the loose end of the pipe.
A. 《持续适航维修大纲》检查文件编号中系统代号的两位数字应使用GAMA第2号规范的编号体系。
B. 在《持续适航维修大纲》检查文件编号中,代表章号的两位数字应遵循GAMA 第2号规范的编号体系。
C. 《持续适航维修大纲》检查文件编号中的两个数字应由GAMA第2号规范中的编号系统决定。
A. 确保钢索张力正常。
B. 确保锁定线束绷紧。
C. 确保保险丝有张力。
A. Those units and components are responsible for storing and delivering fuel to the turbines system, including engine-driven fuel pumps, fuel tanks (airbags), valves, booster pumps, etc. and provide components for dumping fuel overboard.
B. Those units and components are used to store and deliver fuel to the engine, including engine-driven fuel pumps, integral tanks (bladder), valves, boost pumps, etc., and those components which furnish a means of in-flight fuel dumping .
C. Those units and components are designed to store and deliver fuel to the gas engine system, including engine-driven fuel pumps, fuel tanks (airbags), valves, booster pumps, etc. and units to pour fuel to the air.
A. Rapid operation of the accelerometer can cause unexpected movement of the vertical stabilizer.
B. Accidental movement of the compass can cause unwanted operation of the oriental stabilizer.
C. Sudden operation of the gyro can cause unwanted movement of the horizontal stabilizer.
A. Make sure that the tab fully connects to the surface without bubbles.
B. Make sure that the label fully attaches to the surface and that there are no bubbles.
C. Make sure that the tag is fully engaged on the surface and no bubbles.
A. Ignore the absence of contamination in the fuel sample and continue with the procedure.
B. Continue with the procedure if the fuel sample does not exhibit any contamination.
C. Proceed with the procedure regardless of any contamination found in the fuel sample.
A. 本节应包含适当的警报或注意,以告知运营人员有责任确保遵守所有适航命令,并确保飞机的操作、服务和维修在需要时按照《联邦航空条例》进行。
B. 本节应以适当的警告或注意形式,提醒运营人确保遵守所有适航指令,确保按照《联邦航空规章》对飞机进行勤务、养护和维修。
C. 本节应包含适当的警告或注意事项,按照《联邦航空条例》,告知相关人员有责任遵守所有审批指令,确保必要时飞机的操纵、服务和修理可进行。