Tighten the turnbuckle until you have the correct tension in the cable.

A. 维修破损的泵。

B. 拆卸相应的泵。

C. 更换故障泵。

A. "Towing and Taxiing" shall include procedures to be used such as ground turning techniques, use of parking brakes, connection of electrical power, etc..

B. "Towing and Taxiing" shall include procedures to be used such as ground steering techniques, use of chocks, connection of electrical power, etc..

C. "Towing and Taxiing" shall include procedures to be used such as ground turning techniques, use of brakes, connection of electrical power, etc..

A. instruments are delicate precision devices and calibrited used to measuring electrical .All instruments should be periodically checked for accuracy by the manufacturer or by some shop approved by manufacturer.

B. instruments are delicate precision devices and calibrited used to measuring electrical .All instruments should be continuously checked for correct by the manufacturer or by some shop autherized by manufacturer.

C. Electrical measuring instruments are delicate precision devices and calibrited.All instruments should be periodically checked for accuracy by the manufacturer or by some shop approved by manufacturer.

A. The values must be less than the approved differences.

B. The values must not exceed the allowable differences.

C. The values must be less than the allowable differences.

A. IAS shall be monitored continuously until the end of the test.

B. Monitor the speed indication as long as the test continues.

C. Monitor the speed indication continuously until the end of the test.

A. 如果你在英语字典里找不到想用的词，在STE字典中搜索这个词直到找到最好的同义词。

B. 如果你在词典里找不到想用的词，在英语字典中搜索这个词从而找到最优的近义词。

C. 如果你想用的词不在字典里，在英语字典中搜索这个词，找到STE字典中列出的最优的同义词。

A. 每一个系统有一个接收器，这个接收器位于电子舱。电子舱内可以对FMS自动调谐，或是对相应的NAV控制面板手动调谐。

B. 每一个系统有一个接收器，这个接收器位于电子舱。接收器可以通过FMS自动调谐，或是通过相应的NAV控制面板手动调谐。

C. 每一个系统有一个电子舱接收器，接收器可以被FMS远程调谐，或是通过相应的NAV控制面板手动调谐。

A. Get approval for all modifications from the design authority.

B. The design department is irresponsible for approving the changes.

C. The arrangement has to be approved by the design department.

A. Possibly, the incorrect operation will occur due to the contaminated oil jet.

B. Incorrect operation is absolutely resulted from a blocked ignitor.

C. A blocked oil jet can cause incorrect operation.

A. Turn the adjuster clockwise to increase 60 Deg.

B. Turn the adjuster counterclockwise in increments of 60 Deg.

C. Decrease 60 Deg. to turn the adjuster counterclockwise.