A、 Do not install 0.1 mm thick shims.
B、 Do not install shims which are more than 0.1 deep.
C、 Do not install shims that are more than 0.1 mm thick.
答案:C
A、 Do not install 0.1 mm thick shims.
B、 Do not install shims which are more than 0.1 deep.
C、 Do not install shims that are more than 0.1 mm thick.
答案:C
A. Procedures contain tasks that give instructions on how to perform them.
B. Procedures contain general instructions that show you how to do tasks.
C. Procedures contain instructions that tell you how to do a task.
A. The arid welding coat may be polished with thin abrasive paper to hold a smoother layer.
B. The waterless painting coat may be worn with precise abrasive paper for a smoother surface.
C. The dried spray coat may be sanded with fine sandpaper to obtain a smoother finish.
A. 将五份缺陷报告送到工程主管部门。
B. 将五份无损报告送到发动机权威人士。
C. 将五份探测报表送到主管工程师。
A. All aircraft engines must meet certain general efficiency, economy, and reliability requirements, which require that the ignition system can provide ignition pulses at the proper time to the spark plug in various weather and other adverse conditions.
B. All aircraft engines must meet certain overall efficiency, economy and reliability requirements, which require the ignition system should provide ignition pulses at appropriate times under meteorological and other unfavorable conditions.
C. All aircraft engines must meet certain general requirements of reliability, economic and efficiency, which dictates the use of ignition systems that deliver the firing impulse to the spark plugs in all kinds of weather and under other adverse conditions.
A. Two controversial ways can be chosen to do the test, either with the Central Maintenance Computer System through a the MCDU, like you have probably learned already, and with a test switch on the VOR receiver in the avionics compartment.
B. You can do the test following procedures -- with the Central Maintenance Computer System by the MCDU, you have probably learned already, and with a test switch on the VOR receiver in the avionics compartment.
C. The test can be done in either way below-- using the Central Maintenance Computer System via the MCDU, as you have probably already learned, or using a test switch on the VOR receiver in the avionics compartment.
A. 自动驾驶仪使用无线电波、垂直陀螺仪、皮托静压系统以及手动输入来自动控制飞机的偏航、俯仰和滚转。
B. 自动驾驶仪使用无线电波、垂直加速度计、皮托静压系统以及手动输入来自动控制飞机的偏航、俯仰和滚转。
C. 自动驾驶仪使用无线电波、垂直加速度计、皮托管以及手动输入来自动控制飞机的偏航、俯仰和滚转。
A. This system does not supersede the normal channels of communication for items not covered by the CAP.
B. This system will not change the normal ways of communication for items not listed by the CAP.
C. The normal methods of communication for items contained in the CAP will not be shifted.
A. Explaining how to obtain the maximum ground miles per gallon through careful flight planning and attention to good operating procedures is the primary content.
B. Display how to achieve the main objective to get the greater ground miles per gallon by careful flight planning and attention to good operating procedures.
C. The principal purpose is to show how to increases the ground miles per gallon as much as possible with careful flight planning and attention to good operating procedures.
A. 飞机结构件的面积、尺寸、站位、接近门以及物理位置由表、图和文本表示。
B. 飞机结构件的面积、尺寸、纵剖面、接近门以及物理位置由表、图和文本表示。
C. 飞机结构件的面积、尺寸、水位线、接近门以及物理位置由表、图和文本表示。
A. 字母数字索引的主题应包含在简介中,作为定位所需电路的辅助手段。
B. 简介中应包含按主题排列的字母索引,以帮助定位所需的电路。
C. 简介中应包含数字索引的主题,以帮助确定所需的电路。