有关电路跳开关位置的数据，请参考导线清单。

A. Use a drill bit not less than 45 mm long.

B. Use a drill bit that has a maximum length of 45 mm.

C. The drill bit used is more than 45 mm.

A. Accelerate Stop Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, to bring the airplane to a stop.

B. Accelerated stop distance refers to the distance required to promote an aircraft to a stipulated speed, assuming that engine failed occurs at that speed and the aircraft stops flying.

C. Accelerating stop distance is defined as the distance requiring to speed up an aircraft to a specific speed, assuming that engine failed at that speed and the aircraft stops flying.

A. Adjust the longitudinal trim system.

B. Adjust the lateral trim system.

C. Adjust the vertical balancing system.

A. 如果超过50%的污染物造成孔堵塞，则要清理显示组件背面的孔。

B. 如果污染物造成孔堵塞超过 50%，就要清洁显示组件后面的孔。

C. 如果50%的孔被污染物堵塞，则要清理显示组件底部的孔。

A. 本规范中的示例应参照性能呈现格式、相关参数和规则。

B. 性能呈现和相关参数的格式以及规则应遵循本规范中的示例。

C. 性能陈述方式、相关的统计数据和规定应作为实例纳入本规范中。

A. When the cumulative revised pages (including back-up pages) exceeds 60% of the total pages of the manual, a reissue should be prepared.

B. If the updated pages, including back-up pages, were less than 60% of the total page of the manual, a new manual should be copied.

C. Up to 60% of total pages (including back-up pages) were accumulated by mistake, the manual should be rewritten.

A. The data of the revision shall be shown on each printed page.

B. The date of the revision shall be shown on each revised page.

C. The time of the reserve shall be shown on each revised page.

A. 安全说明告诉读者，程序或程序中的步骤可能存在危险或造成损伤。

B. 安全说明告诉读者，程序中的程序或步骤可能是危险的或造成损伤。

C. 安全说明告诉读者哪些程序或步骤是危险的，或是可以造成损伤的。

A. 检查并拆下损坏的零件。

B. 检查拆下的零件是否损坏。

C. 检查损坏的零件，判断是否要拆下。

A. Place the repaired board carefully in the damaged place.

B. Place the repair form directly above the damage.

C. Put the repair sheet accurately on the damaged area.