A、 The operation rods are connected to the hydraulic feedback.
B、 The operation barrels are connected to the hydraulic return.
C、 The actuators are connected to the hydraulic return.
答案：C
A、 The operation rods are connected to the hydraulic feedback.
B、 The operation barrels are connected to the hydraulic return.
C、 The actuators are connected to the hydraulic return.
答案：C
A. Utilize the dimmer switch and ensure that the light＇s luminosity varies vigorously.
B. Manipulate the dimmer switch to confirm the alteration of the light＇s intensity.
C. Activate the dimmer switch and ascertain that the light＇s intensity undergoes little changes.
A. 如果由于腐蚀你不能拆卸螺栓，则涂渗透油。
B. 如果你不能去除螺栓的腐蚀，则申请穿透油。
C. 如果你由于防腐不能拆卸螺钉，则涂渗透油。
A. A maximum distance of 50 feet is required between consumable materials and the work area.
B. Keep flammable materials at a minimum distance of 50 feet from the work area.
C. Explosive materials must be kept at least 50 feet away from the work area.
A. Ensure that the parts bond correctly by applying pressure on the base of the patch.
B. Apply weight to the patch surface to ensure a correct bond between the parts.
C. Do not put pressure on the surface of the patch, as it is unnecessary for proper bonding.
A. Independent, self-contained, gas reservoir assembly offers 7-9 seconds of pressure for operating after actuation.
B. Divided, self-contained, gas reservoir assembly stores the operating energy within 7-9 seconds prior actuation.
C. Single, self-contained, gas reservoir assembly provides the operating pressure within 7-9 seconds after actuation.
A. Find the fueling valve switch for the tank that will get the fuel you are scheduled to transfer.
B. Find the fueling valve switch for the tank that you are scheduled to transfer.
C. Find the fueling valve switch for the tank that need to transfer fuel.
A. An annunciator device is displayed on the panel, which shows how it works.
B. If an annunciator panel is installed, explain how it operates.
C. If a display appears on the annunciator panel, it explains that how the system works.
A. Paint the fasteners with oil.
B. Apply the fasteners greasy.
C. Apply grease to the fasteners.
A. To list repair or modification orders, reference may be made to other document＇s repair standards or the definition of special repair or modification elsewhere (e.g., service kits, service notices, etc.).
B. Listing the repair or modification directions may contrast to the repair rules of another document or especial repairs or modifications defined elsewhere (e.g., service kits, service annunciations, etc.).
C. Set forth repair or modification instructions and may refer to a standard repair in another document or a special repair or modification defined elsewhere, such as in a service kit, service bulletin, etc.
A. When the cumulative revised pages (including back-up pages) exceeds 60% of the total pages of the manual, a reissue should be prepared.
B. If the updated pages, including back-up pages, were less than 60% of the total page of the manual, a new manual should be copied.
C. Up to 60% of total pages (including back-up pages) were accumulated by mistake, the manual should be rewritten.
