A、 To gain entry to the nearby structure, take out the sensor.
B、 Remove the sensor to get access to the adjacent structure.
C、 Disassemble the sensor to get access to the adjacent structure.
答案：B
A、 To gain entry to the nearby structure, take out the sensor.
B、 Remove the sensor to get access to the adjacent structure.
C、 Disassemble the sensor to get access to the adjacent structure.
答案：B
A. If the Halon extinguisher has its lever lock pin lost, you must scale the extinguisher to make sure if it is full.
B. If the hand lock pin on the Halon fire flask is not there, you must weight the extinguisher to see if it is full.
C. If the handle lock pin on the Halon extinguisher is not there, you must weigh the extinguisher to find if it is full.
A. It is not recommended that we remove the damage prior to submitting information to Boeing,such as dents on metallic and composite structures, and delamination or punctures to composite structure.
B. If the removal of dents on metallic and composite structures, and delamination or punctures to composite structure is approved by SRM,CMM,or SB,it is preferable to remove the damage prior to submitting information to Boeing.
C. It is recommended that we remove the damage prior to submitting information to Boeing,such as dents on metallic and composite structures, and delamination or punctures to composite structure.
A. After three full cycles, extend and retract the actuator.
B. You should extend and retract the actuator through three complete cycles.
C. Do nothing to the actuator after three complete cycles.
A. To gain entry to the nearby structure, take out the sensor.
B. Remove the sensor to get access to the adjacent structure.
C. Disassemble the sensor to get access to the adjacent structure.
A. 如果产品的简单性允许，制造商也可以选择将相关系统进行组合。
B. 当产品允许简单组合，制造商还可能对其选择的相关系统进行分组。
C. 当产品可以组合在一起，制造商还可以选择对系统关联进行简要说明。
A. At the manufacturer＇s option, static pressure systems description and discussion may be combined with Paragraph 7.49, Pitot Pressure Systems.
B. The manufacturer could combine the description and discussion of the dynamic pressure systems in Paragraph 7.49, Pitot Pressure Systems.
C. The manufacturer decides to insert static pressure systems description and discussion into Paragraph 7.49, Pitot Pressure Systems.
A. 手册可能是活页形式，与持久的，多环封面，或显著黏附的。
B. 手册可以是活页形式，耐用，多环盖，或临时装订。
C. 手册可以是有耐用多环封面的活页形式，或永久装订。
A. 传动轴部分用于将动力从变速箱传导至发动机。
B. 传动轴部分能够将发动机功率传输至齿轮箱。
C. 传动轴部分在发动机和变速箱之间来回传输动力。
A. One of the safety precautions is to keep the combustible material from the work area at distance of 50ft at least.
B. One of the safety precautions is to keep the flammable material from the work area at distance of 50ft at least.
C. One of the safety precautions is to keep the combustible material from the work area at a minimum distance of 50ft.
A. The pneumatic system gets compressed air from the pneumatic air sources and supplies the compressed air through ducts to the user systems.
B. The pneumatic system gets compressed air from the pneumatic air sources and supplies the compressed air through manifold to the user systems.
C. The pneumatic system gets comprised air from the pneumatic air sources and supplies comprised the air through ducts to the user systems.
