A、 Make sure that the scale is not more than 400 knots.
B、 Make sure that the indication is not more than 400 knots.
C、 Make sure that the indication is not more than 400 miles.
答案:B
A、 Make sure that the scale is not more than 400 knots.
B、 Make sure that the indication is not more than 400 knots.
C、 Make sure that the indication is not more than 400 miles.
答案:B
A. The manufacturer shall include a description of the type service information issued by the manufacturer and the office or department to contact to get such information that the aircraft may be maintained in accordance with the latest information.
B. The manufacturer shall include a description of the type service information issued by the manufacturer and the office or department to contact to obtain such information so that the aircraft may be maintained in accordance with the latest informatio
C. The factory shall include a description of the type service information issued by the manufacturer and the office or department to contact to obtain such information so that the aircraft may be maintained related to the latest information.
A. 适航指令是从事飞机进行维修时必须使用的程序。
B. 在航空器上执行适航指令时,必须阅读本程序。
C. 适航指令必须是对飞机维修有用的程序。
A. Sample the fluid to contaminate microbiology.
B. Do a fuel sampling for microbiological contamination.
C. Obtain a demo of oil to determine the microbial pollution.
A. 油门杆的快速移动将引起喘振。
B. 节流阀的快速运动将造成抽吸现象。
C. 快速移动节气门将造成通气。
A. 在铝合金部件上不要使用藏红花布,它含有氧化铁,在铝合金部件上会造成划痕。
B. 在铝质部件上不要使用细砂布,细砂布含有氧化铁,在铝质部件上会造成腐蚀。
C. 在铝合金部件上不要使用细砂布,细砂布含有氧化铁,在铝合金部件上会造成腐蚀。
A. 确保设备测量值与燃油箱的实际油量一致。
B. 确保表显数值与油箱加油量一致。
C. 确保仪表指示与油箱油量一致。
A. 航空器停留和系留时任何可能遇到的情况的说明在”停留和系留”这个标题下。
B. 航空器在任何可能遇到的情况下如何停留和系留的说明在”停留和系留”这个标题下。
C. 航空器应该服从什么样的条件来停留和系留的说明在”停留和系留”这个标题下。
A. Clean window using much quantities of soap and water.
B. Clean window using liberal quantities of soap and water.
C. Clean window with large quantities of soap and water.
A. 根据FAR 43部的要求,持证飞行员可以拥有或驾驶载客飞机,并可以对其飞机实施限制范围内的预防维护。
B. 持有或驾驶航空器的持证飞行员由FAR 43部授权对其进行特定的预防维护。
C. 如果持证飞行员拥有或驾驶的飞机不用于航空承运目的,他可以按照FAR 43部授权,对飞机进行有限的预防性维护。
A. 组装这个组件。
B. 分解这个单元。
C. 更换这个元件。