A、 By way of the control unit, enter the opening in the side of the tank.
B、 Get access to the control unit through the opening in the side of the tank.
C、 Get access to the control unit by opening one side of the tank.
答案:B
A、 By way of the control unit, enter the opening in the side of the tank.
B、 Get access to the control unit through the opening in the side of the tank.
C、 Get access to the control unit by opening one side of the tank.
答案:B
A. 数据应显示外部大气温度、高度和风与着陆距离的关系。
B. 数据应以着陆距离与外界空气温度、高度和风向的关系来表示。
C. 数据应考虑与外界空气温度、姿态和风的关系。
A. 本规范中的示例应参照性能呈现格式、相关参数和规则。
B. 性能呈现和相关参数的格式以及规则应遵循本规范中的示例。
C. 性能陈述方式、相关的统计数据和规定应作为实例纳入本规范中。
A. 如果可行的话,手册中出现的计量单位应该保持一致。
B. 实际上,手册中出现的测量值必须保持一致。
C. 手册使用的计量单位必须与实际情况保持一致。
A. 此门在飞行中部分打开,在地面时完全打开。
B. 此门在飞行中完全打开,在地面时完全打开。
C. 此门在飞行中部分打开,在地面时也部分打开。
A. The following synonyms are used interchangeably throughout this section and they are the sample of one system and device respectively.
B. The following antonyms are used interchangeably throughout this section and they present the same system and device partly.
C. The following acronyms are used interchangeably throughout this section and they represent the same system and device respectively.
A. The drain float valves in the vent tubes and the vent channels dilute the fuel in the vent system to drain out of the tank when the fuel face is lower than the valve.
B. The drain float valves in the vent tubes and the vent channels permit fuel in the vent system to drain into the tank when the fuel level is lower than the valve.
C. The drain float valves in the vent tubes and from the vent channels allow the fuel in the vent system to drain into the tank when the fuel quantity is lower than the valve.
A. “时间限制和检查计划”这个标题讲的是制造商推荐的针对飞机、其系统和组件检查、维护和大修的时间限制,以及零部件的使用寿命问题(如适用)。
B. “时间限制和检查计划”这个标题讲的是制造商推荐的针对飞机、其系统和组件检查、维护和大修的时间限制,以及零部件的库存寿命问题(如适用)。
C. “时间限制和检查计划”这个标题讲的是制造商推荐的针对飞机、其系统和组件检查、维护和修理的时间限制,以及零部件的使用寿命问题(如适用)。
A. 用干净的毛巾清洁表面。
B. 用干净的布擦表面。
C. 用干布擦表面。
A. On the label, read the date of the last inspection.
B. Check the date of latest inspection on the log.
C. On the label, make sure the date of last check.
A. When installing the distributor, refrain from changing the timing.
B. Ensure that you do not adjust the timing to install the distributor.
C. Do not move the timing when you install the distributor.