A、 格式和布局应由CAP编写者决定,且应与CAP编写者现有文件的格式和布局相似。
B、 CAP编写者决定格式和排版,并认可与编写者现有文件格式类似的格式和排版。
C、 确认与CAP编写者的现有文件相似后,由CAP编写者批准确定表格和设计。
答案:A
A、 格式和布局应由CAP编写者决定,且应与CAP编写者现有文件的格式和布局相似。
B、 CAP编写者决定格式和排版,并认可与编写者现有文件格式类似的格式和排版。
C、 确认与CAP编写者的现有文件相似后,由CAP编写者批准确定表格和设计。
答案:A
A. 应提供重量平衡装载表,同时提供相关计算程序的解释说明
B. 应提供重量和平衡载荷表以及说明计算程序。
C. 应提供重量和平衡载荷表以及计算步骤说明。
A. This procedure is only void in digital mode.
B. This procedure is only valid in digital mode.
C. This procedure is only ineffective in digital mode.
A. The parts must be assembled tightly.
B. Make sure that the parts are attached securely.
C. The parts must be assembled loosely.
A. 将气缸提升至上方位置后进行安装。
B. 将气缸的安装位置提升到上方。
C. 将气缸提升至其安装位置的上方。
A. 慢慢地拧动活门。
B. 慢慢地转动叶片。
C. 慢慢地松开电门。
A. Place the repaired board carefully in the damaged place.
B. Place the repair form directly above the damage.
C. Put the repair sheet accurately on the damaged area.
A. A blocked oil jet cannot enhance performance.
B. Incorrect operation is caused by a blocked oil tank.
C. A blocked oil jet can cause incorrect operation.
A. 涡轮发动机包括用于控制通过发动机空气流量的压缩机排气系统,用于发动机除冰的冷却空气系统,以及发动机启动系统。
B. 涡轮发动机包括压气机引气系统、空气冷却系统、热空气系统、发动机启动系统,其中压气机引气系统能控制通过发动机的空气流量,空气冷却系统和热空气系统用于发动机防冰。
C. 涡轮发动机包括控制通过发动机空气流量的压气机引气系统、空气冷却系统、用于发动机防冰的热空气系统和发动机启动系统。
A. 对于全发工作起飞距离, 应显示不同周围温度、高度、重量和风与起飞距离的对应关系。应包括地面滚转和达到50英尺障碍物高度的总距离。
B. 对于全发工作起飞距离, 应显示不同周围温度、高度、重量和风的条件下所需的起飞距离。应包括地面滑跑距离和达到离地面50英尺时的水平距离。
C. 对于全发工作起飞距离,应显示不同周围温度、高度、重量和风的条件下所需的距离。提供的数据应包括从滑跑始点到飞机达到高于起飞表面50英尺所经过的水平距离。
A. The gearbox is installed behind the pneumatic motor.
B. The pump is installed behind the hydraulic motor.
C. The pump is installed behind the pneumatic turbine.