A、 Use special crank to rotate shaft of reel assembly clockwise to unwind the harness assembly from the spool.
B、 Use special handle to turn the roller of spool assembly clockwise to wind the harness assembly from the reel.
C、 Use special crank to rotate the spool of reel assembly clockwise to unfold the harness assembly from the shaft.
答案:A
A、 Use special crank to rotate shaft of reel assembly clockwise to unwind the harness assembly from the spool.
B、 Use special handle to turn the roller of spool assembly clockwise to wind the harness assembly from the reel.
C、 Use special crank to rotate the spool of reel assembly clockwise to unfold the harness assembly from the shaft.
答案:A
A. 飞行舱是位于地板上方、前部乘客隔板和前部压力圆顶之间的舱室。
B. 驾驶舱指位于地板上方并在前客舱隔板和前增压穹状壁板之间的舱室。
C. 飞行舱是位于地面之上,位于前乘客隔板和前压力罩之间的舱室。
A. This system is used to assist or avoid the formation of ice on masts and fairings.
B. This system is used to eliminate or prevent the formation of ice on antennas and radomes.
C. This system is used to get rid of or escape the formation of ice on probes and domes.
A. 关闭流量控制和空调组件的关断活门。
B. 关闭空调组件的流量控制和关断活门。
C. 至于空调组件,关闭流量控制和关断活门。
A. 防腐剂可能存在于腐蚀严重的部位。
B. 腐蚀敏感的部位可以安装防腐组件。
C. 易受腐蚀的部位可能有防腐剂。
A. Preset the control to get maximum thrust.
B. Set the control to get maximum thrust.
C. Reset the control to get the maximum force .
A. If you bend this part too far, it will break.
B. The part will bend if you break it too much.
C. If you bend the part too much, it will separate.
A. Count the velocity in the circuit.
B. Compute the current in the route.
C. Calculate the voltage in the circuit.
A. This section includes all the limits of the optional systems and equipment.
B. Limitations related to optional systems may be contained in this section.
C. Only the limitations which are relevant to optional systems might be including in this section.
A. The function of this special tool is to remove the shims.
B. The purpose of this special tool is to extract the bushing.
C. The function of this special tool is to extend the washer.
A. Other information or messages, e.g."Report to the manufacturer about the cracks existed", is included here.
B. Additional information or instructions,such as "Report any cracks found to this manufacturer”, are contained here.
C. You can find the following instructions here, for example " Report any scratches to the OEM".