A、 The rules containing in this specification shall provide a guide to the formatting, type and method of all present documents in the manufacturer＇s maintenance manual.
B、 The rules in this specification are served as a guide for the format, style and way of representation for all materials contained in manufacturer＇s maintenance manual.
C、 The rules contained in this specification shall serve as guides for format, style and method of presentation for all material included in maintenance manuals prepared by manufacturers.
答案：C
A、 The rules containing in this specification shall provide a guide to the formatting, type and method of all present documents in the manufacturer＇s maintenance manual.
B、 The rules in this specification are served as a guide for the format, style and way of representation for all materials contained in manufacturer＇s maintenance manual.
C、 The rules contained in this specification shall serve as guides for format, style and method of presentation for all material included in maintenance manuals prepared by manufacturers.
答案：C
A. 为使接头移除更容易，根据手册转动外壳一圈，然后再转一圈。
B. 为了更容易地放置插销取出器，将容器人工地对准一个方向，然后再调整到其他方向。
C. 为了易于拆卸销钉，手动将罩盖先朝一个方向转动，然后再朝另一个方向转动。
A. The index of the maintenance manual shall be comparative to the basic standard category of Part 20. Manufacturers may, however, delete systems or sections that do not apply to their products or, where practicable, combine systems or sections.
B. The index for maintenance manuals shall be compatible with the basic standard breakdown of Section 20. However, manufacturers may omit system or chapters that are not applicable to the product or combine system or chapters where it is feasible.
C. The basic standard category of Part 20 must conform to the index of the maintenance manual. However, manufacturers may elide systems or sections that are not applied to their products, or incorporate systems or sections where applicable.
A. After three full cycles, extend and retract the actuator.
B. You should extend and retract the actuator through three complete cycles.
C. Do nothing to the actuator after three complete cycles.
A. 如果这个部件应该纳入CAP，那么使用最终数据做出判断。
B. 公司应利用现有数据判断该部件是否与CAP相关联。
C. 已用所得数据来确定是否应将该部件纳入CAP。
A. Do not exceed this dimension or Mach in any operation.
B. Do not exceed the regulated flight speed or Mach Number in any operation.
C. Do not exceed this speed or Mach Number in any operation.
A. Put down a face mask and protective clothing.
B. Put on a face goggle and protective clothing.
C. Put on a face mask and protective clothing.
A. 如果发现铜颗粒, 在发现之日起的30天内重复执行整个程序(机轮不承重)。
B. 如果发现金属碎屑，从即日起在30天内完成整个修理程序（机轮承重）。
C. 如果发现琥珀色指示参数，针对发现的数据在30天内重复所有程序（机轮离地）。
A. Detection and coding systems shall be used so that it＇s easy to isolate faults, repair routes and replace the components.
B. You should use the detecting and coding system that can help to remove faults, repair lines and change the components.
C. To facilitate troubleshooting, repair of circuits, and replacement of components, an identification and coding system should be used.
A. 当施加在相同方向的压力值大于预设值时开始工作。
B. 当适用于反方向的压力值大于极限值时开始工作。
C. 当施加在反方向的压力值大于预设值时开始工作。
A. 封面上的信息将由制造商自行决定。
B. 封面包含的信息将由制造商保留。
C. 封面必须包含制造商保留的信息。
