A、 If no tabs are used, an identification method should be supplied to facilitate the location of each system or section.
B、 If tab dividers are not used, a method of identification shall be provided to permit easy location of each System or Chapter.
C、 An identification way should be offered to locate the system and chapter easily if the dividers are improper.
答案:B
A、 If no tabs are used, an identification method should be supplied to facilitate the location of each system or section.
B、 If tab dividers are not used, a method of identification shall be provided to permit easy location of each System or Chapter.
C、 An identification way should be offered to locate the system and chapter easily if the dividers are improper.
答案:B
A. The complexity and stringency of this test or check are different from the operation conditions of the unit.
B. The test or check will change in complexity and stringency no matter what the conditions under which the unit operates.
C. Such tests or checks will vary in complexity and stringency according to the conditions under which the unit functions.
A. Possibly, the incorrect operation will occur due to the contaminated oil jet.
B. Incorrect operation is absolutely resulted from a blocked ignitor.
C. A blocked oil jet can cause incorrect operation.
A. If the wheel temperature reaches as high as 177 deg., the core of safety plug shears off and the tire slips.
B. If the wheel temperature increases to more than 177 deg., the core of the fusible plug melts and the tire deflates.
C. The core of the filter element melts once the wheel temperature is above 177 deg., causing the tire to deflate.
A. A system consists of related components used to perform a specific function.
B. A system is a combination of interrelated components arranged to perform a specific function.
C. A system is combined with relevant components that perform a specific function.
A. Lubricate the engine and its accessories with the same brand.
B. Lubricants for the engine and the auxiliary equipment are the same.
C. The engine and the additional devices are greased in a same manner.
A. Sudden changes in temperature can adjust the internal logic.
B. The internal logic adjusts to sudden changes in temperature.
C. The internal logic can be adjusted by sudden changes in temperature.
A. 可以理解的是,在某些情况下,遵守上述规定会导致重复测试程序,这是可以接受的。
B. 为了符合上述程序,有时会导致进行重复测试,这是可以接受的。
C. 可以理解为,符合上述要求就会导致接受重复测试程序。
A. 如可以,在重新安装或更换新的隔热棉之前,先使用潮湿的绝缘毯。
B. 在重新安装前,将湿的隔热棉弄干;如适用,更换新的隔热棉。
C. 在干燥湿隔热棉之后,根据需要重新安装或更换新的隔热棉。
A. 描述飞机电源系统时,应提供相关限制、警告和操作提示。
B. 描述飞机电源系统时,应解释相关束缚、警示和操作提示。
C. 描述飞机电源系统时,应提供相关限制、警告和操作警示。
A. 如果RAT被撤回,缓慢并完全将其伸出,确保与其他部件衔接上。
B. 如果追踪到RAT,则缓慢并完全释放RAT,确保信号不与其他混淆。
C. 如果RAT是收回状态,缓慢和完全展开RAT,并确保它不碰到其他部件。