A、 See the graphics for information of the solenoid valves which shall contain a note indicating the position of the valve (whether spring-loaded to its open or closed position).
B、 Solenoid valves indicated on the schematic shall have a notation indicating when the valve shall be spring-loaded to the open or closed position.
C、 Solenoid valves shall be indicated on the schematic and shall include a notation indicating whether the valve is spring-loaded to the open or closed position.
答案：C
A、 See the graphics for information of the solenoid valves which shall contain a note indicating the position of the valve (whether spring-loaded to its open or closed position).
B、 Solenoid valves indicated on the schematic shall have a notation indicating when the valve shall be spring-loaded to the open or closed position.
C、 Solenoid valves shall be indicated on the schematic and shall include a notation indicating whether the valve is spring-loaded to the open or closed position.
答案：C
A. 用黑色字体在页面外侧对改版、补充和删除进行说明，对应于已经更改的部分打印内容。
B. 应在书页外侧以垂直黑线标记修订、增加和删除之处，仅对应于印刷件中已更改的内容。
C. 对于经过修订和增删的文字，沿书页外侧用粗黑直线加以标识，并仅打印修改内容部分。
A. 制造商应在本节中提供一个设备列表，并以单独文件形式附在《飞行员运营手册》中，或作为单独的文件。如果设备列表未包含在本节中，说明其位置。
B. 制造商应提供一份相关设备清单，可以包含在本节中，也可以作为《飞行员操作手册》的附录，也可以作为单独的文件。设备清单未包含在本节中时，应说明其位置。
C. 制造商应在本节中提供一份设备清单，并把《飞行员操作手册》作为单独附件或单独文件。如果装备列表未包含在本节中，说明其方向。
A. Get medical aid immediately unless you get the solvent in your eyes,.
B. Get medical aid immediately provided you get the compound in your eyes .
C. If you get the solution in your eyes, get medical aid immediately.
A. Rise the cylinder up its install position.
B. Lift the cylinder above its installed position.
C. Lift the bushings above its installing position.
A. It is necessary to generally check these areas.
B. It is imperative to regularly inspect these areas.
C. Frequent inspection of these areas is necessary.
A. Make sure that the service control unit is in the open position.
B. Make sure that the servo control unit is in the right position.
C. Make sure that the servo control unit is in the open position.
A. At the manufacturer＇s option, static pressure systems description and discussion may be combined with Paragraph 7.49, Pitot Pressure Systems.
B. The manufacturer could combine the description and discussion of the dynamic pressure systems in Paragraph 7.49, Pitot Pressure Systems.
C. The manufacturer decides to insert static pressure systems description and discussion into Paragraph 7.49, Pitot Pressure Systems.
A. When describing the airplane＇s Landing Gear, how its indication system functions shall be explained.
B. When describing the airplane＇s Landing Gear, how its emergency response system functions shall be explained.
C. In the description of the airplane＇s Landing Gear, how its warning system functions shall be explained.
A. Schematics must be readable to a normal visioned person, so legends, symbols, devices, codes, etc., should be of sufficient size. The schematic diagram should be designed to turn over the page when the content is necessary.
B. The schematic diagram must be of sufficient size that legends, symbols, devices, codes, etc., are readable by persons with normal vision. Turn-page schematic diagrams shall be avoided to the extent practical.
C. The schematics, symbols, devices, codes, etc. must be legible, so people with normal vision should avoid turning the schematic pages as much as possible.
A. If you find cracks, refer to the structural repair manual for damage classification and corrective action.
B. If you find the dents, according to the structural maintenance manual to get the damage group and take the correct action.
C. In the event of finding gaps, read the structural maintenance manual to sort the loss and correct the action.
