A、 Schematics must be readable to a normal visioned person, so legends, symbols, devices, codes, etc., should be of sufficient size. The schematic diagram should be designed to turn over the page when the content is necessary.
B、 The schematic diagram must be of sufficient size that legends, symbols, devices, codes, etc., are readable by persons with normal vision. Turn-page schematic diagrams shall be avoided to the extent practical.
C、 The schematics, symbols, devices, codes, etc. must be legible, so people with normal vision should avoid turning the schematic pages as much as possible.
答案:B
A、 Schematics must be readable to a normal visioned person, so legends, symbols, devices, codes, etc., should be of sufficient size. The schematic diagram should be designed to turn over the page when the content is necessary.
B、 The schematic diagram must be of sufficient size that legends, symbols, devices, codes, etc., are readable by persons with normal vision. Turn-page schematic diagrams shall be avoided to the extent practical.
C、 The schematics, symbols, devices, codes, etc. must be legible, so people with normal vision should avoid turning the schematic pages as much as possible.
答案:B
A. 最常见的的错误是发生在将油量单位从夸脱转换成加仑的极限装载检查中。
B. 在极限装载检查中,最常见的的错误是没有将滑油单位从夸脱转换成加仑。
C. 在极限装载检查中,最常见的错误是把滑油单位从夸脱转换成加仑。
A. 如果你发现低于正常数量的空气从桅杆排出,做系统功能测试。
B. 如果你发现从通风口桅杆排出的空气量不正常,做系统测试。
C. 如果你发现不寻常的空气量从主排气口排出,做功能测试。
A. 系统示意图应包括被视为流程起点的发电机、油箱和液压油箱等。部件的布置应使系统的流程追踪起来最不费力。尽量避免纵横交错。
B. 系统流程图应包括发电机、油箱或液压油箱等。示意图的布局应使部件追踪毫不费力。尽量避免管道交叉。
C. 系统流程图应以发电机、油箱或液压油箱等作为流程起点。示意图的布局应使对流程分析毫不费力。尽量避免线路交叉。
A. Apparently, the Supplement about the subject system or equipment, if installed, must be in the Pilot's Operating Handbook whenever applicable.
B. You shall know clearly that when the subject system or equipment is installed, the Pilot's Operating Handbook must always contain the related Supplement.
C. When the subject system or equipment is installed, you need to clearly identify the associated Supplement in the Pilot's Operating Handbook at all times.
A. The valve has flaps shaped like a full circle.
B. The shape of the valve flaps is a half ring.
C. The valve flaps have a shape of half circle.
A. 示例应阐述最常见的情况,避免涉及标准温度、基准重量、零风速、精确参数值或其他非典型的实际情况。
B. 说明最普遍使用的情况,避免涉及标准温度、参考重量、零风速、表格精确值或其他非典型实际情况的特殊情况。
C. 说明演示的最一般用途,避免出现涉及标准温度、参考重量、零风速、表格精确条目或其他非典型实际情况的特殊情况。
A. 左大翼二号油箱盖板断裂。
B. 左大翼二号油箱接近门变形。
C. 左大翼二号油箱入口门脱落。
A. 来回操作升降舵6次。
B. 操作升降舵6个行程。
C. 全行程操作升降舵6次。
A. 防腐剂可能存在于腐蚀严重的部位。
B. 腐蚀敏感的部位可以安装防腐组件。
C. 易受腐蚀的部位可能有防腐剂。
A. 用可用的方式计算压力。
B. 计算带可用公式的压力。
C. 用适用的公式计算压力。