A、 Continuing Airworthiness Programs may be prepared according to the related Federal Aviation Regulations for all types of general aviation airplanes and components.
B、 All types of general aviation airplanes and components are certified by the applicable Federal Aviation Regulations which require the preparation of Continuing Airworthiness Programs.
C、 Continuing Airworthiness Programs may be prepared for all types of general aviation airplanes and components certificated under the applicable Federal Aviation Regulations.
答案：C
A、 Continuing Airworthiness Programs may be prepared according to the related Federal Aviation Regulations for all types of general aviation airplanes and components.
B、 All types of general aviation airplanes and components are certified by the applicable Federal Aviation Regulations which require the preparation of Continuing Airworthiness Programs.
C、 Continuing Airworthiness Programs may be prepared for all types of general aviation airplanes and components certificated under the applicable Federal Aviation Regulations.
答案：C
A. Metal objects attract magnetic interference.
B. Magnetic interference can occur to the metal objects.
C. Metal objects can cause magnetic interference.
A. Make sure that the material and dimensions of the new floor panel are the same with the removed one.
B. Make sure that contour and design of the new floor panel have no difference with the removed one.
C. Make sure that the new floor panel has the same contour and dimensions as the removed floor panel.
A. This document shall clearly states the minimum size crack you may discover in a crack inspection. If no minimum is defined, it shall have a statement that has the same effect.
B. This document shall specify the minimum allowed crack size expected to be discovered for a crack inspection or, if no minimum is defined, an equally valid standard.
C. The minimum crack size you are going to discover during a crack inspection shall be included in this document. However, if you could not set forth a standard, a statement shall take place.
A. The operation of new generation aircraft has adopted the operation method of damage tolerance.
B. The damage tolerance design method is applicable to the new type aircraft.
C. The design concept of damage tolerance was successfully applied to the design of new generation aircraft.
A. 当控制手柄到DN位时，齿轮箱壳体会打开，齿轮松开并退出，壳体关闭。
B. 当控制手柄处于DN位置时，起落架舱门会打开，起落架解锁并伸出，然后舱门关闭。
C. 将控制手柄推到DN位置时，货舱门将打开，传动装置解锁可用，收回后则关闭。
A. 确保不要使用不相关的单词，因为这将改变短语动词的意思。
B. 确保不要将无关的单词连在一起，因为这会改变名词词组的意思。
C. 确保不要连用意思相反的单词，因为这会改变固定搭配的意思。
A. 如果飞机有一个内置的辅助动力装置，描述该装置并解释它是如何配合电气系统工作的.
B. 如果飞机有一个附加的辅助电源组件，描述该装置并解释它是如何对接电气系统的.
C. 如果飞机有一个内置的辅助动力装置，描述该装置并解释它是如何装配到电气系统的.
A. 如果你不能脱开杆的位置，新杆的长度很可能需要调节。
B. 如果你不能断开杆和活塞，可能量错了新杆的长度。
C. 如果你不能接合杆和活塞，新杆的长度可能是不正确的。
A. However, manufacturers may omit System/Chapters that are not applicable to the product or combine Systems/Chapters where it is feasible.
B. However, manufacturers may adopt Systems/Chapters that are not applicable to the product or constitute Systems/Chapters when necessary.
C. However, operators may omit Systems/Chapters applicable to the product or constitute Systems/Chapters where practical.
A. Keep out of the engine before it starts.
B. Keep away from the intake area before the engine starts.
C. Go away from the exhaust area before the engine starts.
